This chapter presents an extensible indexing example in which some ODCIIndex interface routines are implemented in C.
This chapter contains these topics:
The example in this chapter illustrates how to implement the extensible indexing interface routines in C. The example's focus is on topics that are common to all implementations; it does not expose domain-specific details.
The code for the example is in the demo directory, in the file extdemo6.sql. It extends an earlier example (extdemo2.sql, also in demo directory) by adding to the indextype support for local domain indexes on range partitioned tables.
The indextype implemented here, called PSBtree, operates like a b-tree index. It supports three user-defined operators: eq (equals), lt (less than), and gt (greater than). These operators operate on operands of VARCHAR2 data type.
The index data consists of records of the form <key, rid> where key is the value of the indexed column and rid is the row identifier of the corresponding row. To simplify the implementation of the indextype, the index data is stored in an system-partitioned table.
When an index is a system-managed local domain index, one partition in a system-partitioned table is created for each partition to store the index data for that partition. Thus, the index manipulation routines merely translate operations on the PSBtree into operations on the table partition that stores the index data.
When a user creates a PSBtree index (a local index), n table partitions are created consisting of the indexed column and a rowid column, where n is the number of partitions in the base table. Inserts into the base table cause appropriate insertions into the affected index table partition. Deletes and updates are handled similarly. When the PSBtree is queried based on a user-defined operator (one of gt, lt and eq), an appropriate query is issued against the index table partitions to retrieve all the satisfying rows. Appropriate partition pruning occurs, and only the index table partitions that correspond to the relevant, or "interesting", partitions are accessed.
The PSBtree indextype supports three operators. Each operator has a corresponding functional implementation. The functional implementations of the eq, gt and lt operators are presented in the following section.
This section describes the functional implementation of comparison operators. Example 16-1 shows how to implement eq (equals), Example 16-2 shows how to implement lt (less than), and Example 16-3 shows how to implement gt (greater than) operators.
Example 16-1 Implementing the EQUALS Operator
The functional implementation for eq is provided by a function (bt_eq) that takes in two VARCHAR2 parameters and returns 1 if they are equal and 0 otherwise.
CREATE FUNCTION bt_eq(a VARCHAR2, b VARCHAR2) RETURN NUMBER AS
BEGIN
IF a = b then
RETURN 1;
ELSE
RETURN 0;
END IF;
END;
Example 16-2 Implementing the LESS THAN Operator
The functional implementation for lt is provided by a function (bt_lt) that takes in two VARCHAR2 parameters and returns 1 if the first parameter is less than the second, 0 otherwise.
CREATE FUNCTION bt_lt(a VARCHAR2, b VARCHAR2) RETURN NUMBER AS
BEGIN
IF a < b then
RETURN 1;
ELSE
RETURN 0;
END IF;
END;
Example 16-3 Implementing the GREATER THAN Operator
The functional implementation for gt is provided by a function (bt_gt) that takes in two VARCHAR2 parameters and returns 1 if the first parameter is greater than the second, 0 otherwise.
CREATE FUNCTION bt_gt(a VARCHAR2, b VARCHAR2) RETURN NUMBER AS
BEGIN
IF a > b then
RETURN 1;
ELSE
RETURN 0;
END IF;
END;
To create the operator, you must specify the signature of the operator along with its return type and its functional implementation. Example 16-4 shows how to create eq (equals), Example 16-5 shows how to create lt (less than), and Example 16-6 shows how to create gt (greater than) operators.
Example 16-4 Creating the EQUALS Operator
CREATE OPERATOR eq BINDING (VARCHAR2, VARCHAR2) RETURN NUMBER USING bt_eq;
To implement the PSBTREE, you must implement the ODCIIndexXXX() routines, as outlined in the following sections. You can implement the index routines in any language supported by Oracle. This section implements the ODCIGetInterfaces() routine in the C programming language. Note that these require advance setup, such as creating a library object, extdemo6l, for your compiled C code.
Define an implementation type that implements the ODCIIndex interface routines, as demonstrated in Example 16-7.
Example 16-7 Creating a PSBTREE Index Type
CREATE TYPE psbtree_im AS OBJECT
(
scanctx RAW(4),
STATIC FUNCTION ODCIGetInterfaces(ifclist OUT SYS.ODCIObjectList)
RETURN NUMBER,
STATIC FUNCTION ODCIIndexCreate (ia SYS.ODCIIndexInfo, parms VARCHAR2,
env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexAlter (ia sys.ODCIIndexInfo,
parms IN OUT VARCHAR2, altopt number, env sys.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexDrop(ia SYS.ODCIIndexInfo, env SYS.ODCIEnv)
RETURN NUMBER,
STATIC FUNCTION ODCIIndexExchangePartition(ia SYS.ODCIIndexInfo,
ia1 SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexUpdPartMetadata(ia sys.ODCIIndexInfo,
palist sys.ODCIPartInfoList, env sys.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexExchangePartition (ia sys.ODCIIndexInfo,
ia1 sys.ODCIIndexInfo, env sys.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexInsert(ia SYS.ODCIIndexInfo, rid VARCHAR2,
newval VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexDelete(ia SYS.ODCIIndexInfo, rid VARCHAR2,
oldval VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexUpdate(ia SYS.ODCIIndexInfo, rid VARCHAR2,
oldval VARCHAR2, newval VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexStart(sctx IN OUT psbtree_im, ia SYS.ODCIIndexInfo,
op SYS.ODCIPredInfo, qi sys.ODCIQueryInfo, strt number, stop number,
cmpval VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER,
MEMBER FUNCTION ODCIIndexFetch(nrows NUMBER, rids OUT SYS.ODCIridlist,
env SYS.ODCIEnv) RETURN NUMBER,
MEMBER FUNCTION ODCIIndexClose(env SYS.ODCIEnv) RETURN NUMBER
);
/
SHOW ERRORS
Define the implementation type body, as demonstrated in Example 16-8.
The examples in this section demonstrate how to implement the index definition routines in PL/SQL. Example 16-9 shows how to implement ODCIGetInterfaces(), Example 16-10 shows how to implement ODCIIndexCreate(), Example 16-11 shows how to implement ODCIIndexDrop(), Example 16-12 shows how to implement ODCIIndexAlter(), Example 16-13 shows how to implement ODCIIndexUpdPartMetadata(), and Example 16-14 shows how to implement ODCIIndexExchangePartition().
Example 16-9 Implementing ODCIGetInterfaces() for PBSTREE in PL/SQL
The ODCIGetInterfaces() routine, demonstrated in Example 16-9, returns the expected interface name through its OUT parameter.
STATIC FUNCTION ODCIGetInterfaces(
ifclist OUT sys.ODCIObjectList)
RETURN NUMBER IS
BEGIN
ifclist := sys.ODCIObjectList(sys.ODCIObject('SYS','ODCIINDEX2'));
RETURN ODCIConst.Success;
END ODCIGetInterfaces;
Example 16-10 Implementing ODCIIndexCreate() for PBSTREE in PL/SQL
The ODCIIndexCreate() routine creates a system-partitioned index storage table with two columns. The first column stores the VARCHAR2 indexed column value. The routine makes use of the information passed in to determine the context in which it is invoked. Dynamic SQL is used to execute the dynamically constructed SQL statement.
STATIC FUNCTION ODCIIndexCreate (
ia sys.ODCIIndexInfo,
parms VARCHAR2,
env sys.ODCIEnv)
RETURN NUMBER IS
i INTEGER;
stmt VARCHAR2(2000);
cursor cur1(ianame VARCHAR2) IS
SELECT partition_name, parameters
FROM user_ind_partitions
WHERE index_name = ianame order by partition_name;
BEGIN
stmt := '';
IF (env.CallProperty is null) THEN
stmt := 'create table ' ||ia.IndexSchema || '.' || ia.IndexName ||
'_sbtree(f1 VARCHAR2(1000), f2 rowid)';
ELSEIF (env.callproperty = sys.ODCIConst.FirstCall) THEN
stmt := '';
i := 1;
FOR c1 in cur1(ia.indexname) LOOP
IF (i >1) THEN
stmt := stmt || ',';
END IF;
stmt := stmt || 'partition ' || c1.partition_name;
i := i+1;
END LOOP;
stmt := 'create table ' || ia.indexschema || '.' || ia.indexname ||
'_sbtree (f1 VARCHAR2(1000), f2 rowid) partition by system ' ||
'( ' || stmt || ')';
ELSEIF (env.callproperty = sys.ODCIConst.FinalCall) THEN
stmt := 'create index ' || ia.indexschema || '.' || ia.indexname ||
'_sbti on ' || ia.indexschema || '.' || ia.indexname ||
'_sbtree (f1) local';
END IF;
dbms_output.put_line('Create');
dbms_output.put_line(stmt);
-- execute the statement
IF ((env.CallProperty is null) OR
(env.CallProperty = sys.ODCIConst.FirstCall) OR
(env.CallProperty = sys.ODCIConst.FinalCall) ) THEN
execute immediate stmt;
IF (env.CallProperty is null) THEN
execute immediate 'insert into ' ||ia.IndexSchema || '.' || ia.IndexName
|| '_sbtree select ' || ia.IndexCols(1).Colname || ', ROWID from ' ||
ia.IndexCols(1).TableSchema || '.' || ia.IndexCols(1).TableName;
execute immediate 'create index ' || ia.indexschema || '.' ||
ia.indexname || '_sbti on ' || ia.indexschema || '.' ||
ia.indexname || '_sbtree (f1)';
END IF;
END IF;
RETURN ODCIConst.Success;
END ODCIIndexCreate;
Example 16-11 Implementing ODCIIndexDrop() for PBSTREE in PL/SQL
The ODCIIndexDrop() routine drops the index storage tables.
STATIC FUNCTION ODCIIndexDrop(
ia sys.ODCIIndexInfo,
env sys.ODCIEnv)
RETURN NUMBER IS
stmt VARCHAR2(1000);
cnum INTEGER;
junk INTEGER;
BEGIN
-- construct the sql statement
stmt := '';
IF (env.CallProperty is null) THEN
stmt := 'drop table ' || ia.IndexSchema || '.' || ia.IndexName || '_sbtree';
dbms_output.put_line('Drop');
dbms_output.put_line(stmt);
execute immediate stmt;
END IF;
RETURN ODCIConst.Success;
END ODCIIndexDrop;
Example 16-12 Implementing ODCIIndexAlter() for PSBTREE in PL/SQL
The ODCIIndexAlter() routine can perform many index alteration tasks, such as rebuilding and renaming an index.
STATIC FUNCTION ODCIIndexAlter (
ia sys.ODCIIndexInfo,
parms IN OUT VARCHAR2,
altopt NUMBER,
env sys.ODCIEnv)
RETURN NUMBER IS
stmt VARCHAR2(2000);
BEGIN
stmt := '';
IF (altopt = ODCIConst.AlterIndexRebuild) THEN
IF (ia.IndexPartition is null) THEN
stmt := 'insert into ' || ia.indexschema || '.' || ia.indexname ||
'_sbtree select ' || ia.indexcols(1).colname || ', rowid from ' ||
ia.indexcols(1).tableschema || '.' || ia.indexcols(1).tablename;
ELSE
stmt := 'insert into ' || ia.indexschema || '.' || ia.indexname ||
'_sbtree partition (' || ia.indexpartition || ') select ' ||
ia.indexcols(1).colname || ', rowid from ' ||
ia.indexcols(1).tableschema || '.' || ia.indexcols(1).tablename ||
' partition (' || ia.indexcols(1).tablepartition || ')';
END IF;
ELSEIF (altopt = ODCIConst.AlterIndexRename) THEN
IF (ia.IndexPartition is not null) THEN
stmt := 'alter table ' || ia.indexschema || '.' || ia.indexname ||
'_sbtree rename partition ' || ia.indexpartition || ' to ' || parms;
ELSE
stmt := 'alter table ' || ia.indexschema || '.' || ia.indexname ||
'_sbtree rename to ' || parms || '_sbtree';
END IF;
END IF;
dbms_output.put_line('Alter');
IF ((altopt=ODCIConst.AlterIndexRebuild) or (altopt=ODCIConst.AlterIndexRename))
THEN
dbms_output.put_line(stmt);
execute immediate stmt;
END IF;
RETURN ODCIConst.Success;
END ODCIIndexAlter;
Example 16-13 Implementing ODCIIndexUpdPartMetadata() for PSBTREE in PL/SQL
To handle partition maintenance operations, the kernel performs the maintenance tasks on behalf of the user. The indextype, to maintain its metadata, should have the ODCIIndexUpdPartMetadata() routine.
STATIC FUNCTION ODCIIndexUpdPartMetadata(
ia sys.ODCIIndexInfo,
palist sys.ODCIPartInfoList,
env sys.ODCIEnv)
RETURN NUMBER IS
col number;
BEGIN
dbms_output.put_line('ODCIUpdPartMetadata');
sys.ODCIIndexInfoDump(ia);
sys.ODCIPartInfoListDump(palist);
sys.ODCIEnvDump(env);
RETURN ODCIConst.Success;
END ODCIIndexUpdPartMetadata;
Example 16-14 Implementing ODCIIndexExchangePartition() for PSBTREE in PL/SQL
The ODCIIndexExchangePartition() exchanges the index storage tables for the index partition being exchanged, with the index storage table for the global domain index.
STATIC FUNCTION ODCIIndexExchangePartition(
ia sys.ODCIIndexInfo,
ia1 sys.ODCIIndexInfo,
env sys.ODCIEnv)
RETURN NUMBER IS
stmt VARCHAR2(2000);
cnum INTEGER;
junk INTEGER;
BEGIN
stmt := '';
dbms_output.put_line('Exchange Partitions');
-- construct the sql statement
stmt := 'alter table ' || ia.IndexSchema || '.' || ia.IndexName ||
'_sbtree exchange partition ' || ia.IndexPartition || ' with table ' ||
ia1.IndexSchema || '.' || ia1.IndexName || '_sbtree';
dbms_output.put_line(stmt);
execute immediate stmt;
RETURN ODCIConst.Success;
END ODCIIndexExchangePartition;
After creating the extdemo6l library object for the compiled C methods, you must register the implementations of each of the routines. Example 16-15 demonstrates how to register the ODCIIndexInsert() implementation, Example 16-16 registers the ODCIIndexDelete() implementation, Example 16-17 registers the ODCIIndexUpdate() implementation, Example 16-18 registers the ODCIIndexStart() implementation, Example 16-19 registers the ODCIIndexFetch() implementation, and Example 16-20 registers the ODCIIndexClose() implementation.
Example 16-15 Registering the Implementation of ODCIIndexInsert()
Register the implementation of the ODCIIndexInsert() routine.
STATIC FUNCTION ODCIIndexInsert( ia SYS.ODCIIndexInfo, rid VARCHAR2, newval VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER AS EXTERNAL name "qxiqtbspi" library extdemo6l with context parameters ( context, ia, ia indicator struct, rid, rid indicator, newval, newval indicator, env, env indicator struct, return OCINumber );
Example 16-16 Registering the Implementation of ODCIIndexDelete()
Register the implementation of the ODCIIndexDelete() routine.
STATIC FUNCTION ODCIIndexDelete( ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER AS EXTERNAL name "qxiqtbspd" library extdemo6l with context parameters ( context, ia, ia indicator struct, rid, rid indicator, oldval, oldval indicator, env, env indicator struct, return OCINumber );
Example 16-17 Registering the Implementation of ODCIIndexUpdate()
Register the implementation of the ODCIIndexUpdate() routine.
STATIC FUNCTION ODCIIndexUpdate( ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval VARCHAR2, newval VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER AS EXTERNAL name "qxiqtbspu" library extdemo6l with context parameters ( context, ia, ia indicator struct, rid, rid indicator, oldval, oldval indicator, newval, newval indicator, env, env indicator struct, return OCINumber );
Example 16-18 Registering the Implementation of ODCIIndexStart()
Register the implementation of the ODCIIndexStart() routine.
STATIC FUNCTION ODCIIndexStart( sctx IN OUT psbtree_im, ia SYS.ODCIIndexInfo, op SYS.ODCIPredInfo, qi SYS.ODCIQueryInfo, strt NUMBER, stop NUMBER, cmpval VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER AS EXTERNAL name "qxiqtbsps" library extdemo6l with context parameters ( context, sctx, sctx indicator struct, ia, ia indicator struct, op, op indicator struct, qi, qi indicator struct, strt, strt indicator, stop, stop indicator, cmpval, cmpval indicator, env, env indicator struct, return OCINumber );
Example 16-19 Registering the Implementation of ODCIIndexFetch()
Register the implementation of the ODCIIndexFetch() routine.
MEMBER FUNCTION ODCIIndexFetch( nrows NUMBER, rids OUT SYS.ODCIRidList, env SYS.ODCIEnv) RETURN NUMBER AS EXTERNAL name "qxiqtbspf" library extdemo6l with context parameters ( context, self, self indicator struct, nrows, nrows indicator, rids, rids indicator, env, env indicator struct, return OCINumber );
Example 16-20 Registering the Implementation of ODCIIndexClose()
Register the implementation of the ODCIIndexClose() routine.
MEMBER FUNCTION ODCIIndexClose ( env SYS.ODCIEnv) RETURN NUMBER AS EXTERNAL name "qxiqtbspc" library extdemo6l with context parameters ( context, self, self indicator struct, env, env indicator struct, return OCINumber );
The stucts qxiqtim and qciqtin, and the struct qxiqtcx are used for mapping the object type and its null value (demonstrated in Example 16-21) and for keeping state during fetching calls (demonstrated in Example 16-22). These structures are used by the methods described in section "Defining C Methods in the Implementation Body".
The C structs for mapping the ODCI types are defined in the file odci.h. For example, the C struct ODCIIndexInfo is the mapping for the corresponding ODCI object type. The C struct ODCIIndexInfo_ind is the mapping for the null object.
Example 16-21 Defining Mappings for the Object Type and Its Null Value
We have defined a C struct, qxiqtim, as a mapping for the object type. There is an additional C struct, qxiqtin, for the corresponding null object. The C structs for the object type and its null object can be generated from the Object Type Translator (OTT).
/* The index implementation type is an object type with a single RAW attribute
* used to store the context key value.
* C mapping of the implementation type : */
struct qxiqtim{
OCIRaw *sctx_qxiqtim;
};
typedef struct qxiqtim qxiqtim;
struct qxiqtin{
short atomic_qxiqtin;
short scind_qxiqtin;
};
typedef struct qxiqtin qxiqtin;
Example 16-22 Keeping the Scan State During Fetching Calls
There are a set of OCI handles that must be cached away and retrieved during fetch calls. A C struct, qxiqtcx, is defined to hold all the necessary scan state. This structure is allocated out of OCI_DURATION_STATEMENT memory to ensure that it persists till the end of fetch. After populating the structure with the required info, a pointer to the structure is saved in OCI context. The context is identified by a 4-byte key that is generated by calling an OCI routine. The 4-byte key is stashed away in the scan context - exiting. This object is returned back to the Oracle server and is passed in as a parameter to the next fetch call.
/* The index scan context - should be stored in "statement" duration memory
* and used by start, fetch and close routines.
*/
struct qxiqtcx
{
OCIStmt *stmthp;
OCIDefine *defnp;
OCIBind *bndp;
char ridp[19];
};
typedef struct qxiqtcx qxiqtcx;
The following methods have been implemented in the C language. Example 16-23 demonstrates how to implement an error processing routine, Example 16-24 implements ODCIIndexInsert(), Example 16-25 implements ODCIIndexDelete(), Example 16-26 implements ODCIIndexUpdate(), Example 16-27 implements ODCIIndexStart(), Example 16-28 implements ODCIIndexFetch(), and Example 16-29 implements ODCIIndexClose().
Example 16-23 Implementing a Common Error Processing Routine in C
This function is used to check and process the return code from all OCI routines. It checks the status code and raises an exception in case of errors.
static int qxiqtce(
OCIExtProcContext *ctx,
OCIError *errhp,
sword status)
{
text errbuf[512];
sb4 errcode = 0;
int errnum = 29400; /* choose some oracle error number */
int rc = 0;
switch (status)
{
case OCI_SUCCESS:
rc = 0;
break;
case OCI_ERROR:
(void) OCIErrorGet((dvoid *)errhp, (ub4)1, (text *)NULL, &errcode,
errbuf, (ub4)sizeof(errbuf), OCI_HTYPE_ERROR);
/* Raise exception */
OCIExtProcRaiseExcpWithMsg(ctx, errnum, errbuf, strlen((char *)errbuf));
rc = 1;
break;
default:
(void) sprintf((char *)errbuf, "Warning - some error\n");
/* Raise exception */
OCIExtProcRaiseExcpWithMsg(ctx, errnum, errbuf, strlen((char *)errbuf));
rc = 1;
break;
}
return (rc);
}
Example 16-24 Implementing ODCIIndexInsert() for PSBTREE in C
The insert routine, ODCIIndexInsert(), parses and executes a statement that inserts a new row into the index table. The new row consists of the new value of the indexed column and the rowid that have been passed in as parameters.
OCINumber *qxiqtbspi(
OCIExtProcContext *ctx,
ODCIIndexInfo *ix,
ODCIIndexInfo_ind *ix_ind,
char *rid,
short rid_ind,
char *newval,
short newval_ind,
ODCIEnv *env,
ODCIEnv_ind *env_ind)
{
OCIEnv *envhp = (OCIEnv *) 0; /* env. handle */
OCISvcCtx *svchp = (OCISvcCtx *) 0; /* service handle */
OCIError *errhp = (OCIError *) 0; /* error handle */
OCIStmt *stmthp = (OCIStmt *) 0; /* statement handle */
OCIBind *bndp = (OCIBind *) 0; /* bind handle */
int retval = (int)ODCI_SUCCESS; /* return from this function */
OCINumber *rval = (OCINumber *)0;
char insstmt[2000]; /* sql insert statement */
ODCIColInfo *colinfo; /* column info */
ODCIColInfo_ind *colinfo_ind;
boolean exists = TRUE;
unsigned int partiden; /* table partition iden */
unsigned int idxflag; /* index info flag
/* allocate memory for OCINumber first */
rval = (OCINumber *)OCIExtProcAllocCallMemory(ctx, sizeof(OCINumber));
/* Get oci handles */
if (qxiqtce(ctx, errhp, OCIExtProcGetEnv(ctx, &envhp, &svchp, &errhp)))
return(rval);
/* set up return code */
if (qxiqtce(ctx, errhp, OCINumberFromInt(errhp, (dvoid *)&retval,
sizeof(retval), OCI_NUMBER_SIGNED, rval)))
return(rval);
/* Convert idxflag to integer from OCINumber */
if (qxiqtce(ctx, errhp, OCINumberToInt(errhp, &(ix->IndexInfoFlags),
sizeof(idxflag), OCI_NUMBER_UNSIGNED, ( void *)&idxflag)))
return(rval);
/*****************************
* Construct insert Statement *
******************************/
if ((idxflag & ODCI_INDEX_RANGE_PARTN) != ODCI_INDEX_RANGE_PARTN)
(void)sprintf(insstmt, "INSERT into %s.%s_sbtree values (:newval, :mrid)",
OCIStringPtr(envhp, ix->IndexSchema), OCIStringPtr(envhp, ix->IndexName));
else
{
if (qxiqtce(ctx, errhp, OCICollGetElem(envhp, errhp, (OCIColl *)ix->IndexCols,
(sb4)0, &exists, (void **) &colinfo, (void **) &colinfo_ind)))
return(rval);
(void)sprintf(insstmt,
"INSERT into %s.%s_sbtree partition (SYS_OP_DOBJTOPNUM(%s, :partiden))
VALUES (:newval, :mrid)",
OCIStringPtr(envhp, ix->IndexSchema), OCIStringPtr(envhp, ix->IndexName),
OCIStringPtr(envhp, colinfo->TableName));
}
/***************************************
* Parse and Execute Create Statement *
****************************************/
/* allocate stmt handle */
if (qxiqtce(ctx, errhp, OCIHandleAlloc((dvoid *)envhp, (dvoid **)&stmthp,
(ub4)OCI_HTYPE_STMT, (size_t)0, (dvoid **)0)))
return(rval);
/* prepare the statement */
if (qxiqtce(ctx, errhp, OCIStmtPrepare(stmthp, errhp, (text *)insstmt,
(ub4)strlen(insstmt), OCI_NTV_SYNTAX, OCI_DEFAULT)))
return(rval);
if ((idxflag & ODCI_INDEX_RANGE_PARTN) == ODCI_INDEX_RANGE_PARTN)
{
/* Convert partiden to integer from OCINumber */
if (qxiqtce(ctx, errhp, OCINumberToInt(errhp,
&(colinfo->TablePartitionIden), sizeof(partiden), OCI_NUMBER_UNSIGNED,
( void *)&partiden)))
return(rval);
/* Set up bind for partiden */
if (qxiqtce(ctx, errhp, OCIBindByName(stmthp, &bndp, errhp,
text *)":partiden", sizeof(":partiden")-1, (dvoid *)&partiden,
(sb4)(sizeof(partiden)), (ub2)SQLT_INT, (dvoid *)0, (ub2 *)0,
(ub2 *)0, (ub4)0, (ub4 *)0, (ub4)OCI_DEFAULT)))
return(rval);
}
/* Set up bind for newval */
if (qxiqtce(ctx, errhp, OCIBindByName(stmthp, &bndp, errhp, (text *)":newval",
sizeof(":newval")-1, (dvoid *)newval, (sb4)(strlen(newval)+1),
(ub2)SQLT_STR, (dvoid *)0, (ub2 *)0, (ub2 *)0, (ub4)0, (ub4 *)0,
(ub4)OCI_DEFAULT)))
return(rval);
/* Set up bind for rid */
if (qxiqtce(ctx, errhp, OCIBindByName(stmthp, &bndp, errhp, (text *)":mrid",
sizeof(":mrid")-1, (dvoid *)rid, (sb4)(strlen(rid)+1), (ub2)SQLT_STR,
(dvoid *)0, (ub2 *)0, (ub2 *)0, (ub4)0, (ub4 *)0, (ub4)OCI_DEFAULT)))
return(rval);
/* Execute statement */
if (qxiqtce(ctx, errhp, OCIStmtExecute(svchp, stmthp, errhp, (ub4)1,
(ub4)0, (OCISnapshot *)NULL, (OCISnapshot *)NULL, (ub4)OCI_DEFAULT)))
return(rval);
/* free stmt handle */
if (qxiqtce(ctx, errhp, OCIHandleFree((dvoid *)stmthp, (ub4)OCI_HTYPE_STMT)))
return(rval);
return(rval);
}
Example 16-25 Implementing ODCIIndexDelete() for PSBTREE in C
The delete routine constructs a SQL statement to delete a row from the index table corresponding to the row being deleted from the base table. The row in the index table is identified by the value of rowid that is passed in as a parameter to this routine.
OCINumber *qxiqtbspd(
OCIExtProcContext *ctx,
ODCIIndexInfo *ix,
ODCIIndexInfo_ind *ix_ind,
char *rid,
short rid_ind,
char *oldval,
short oldval_ind,
ODCIEnv *env,
ODCIEnv_ind *env_ind)
{
OCIEnv *envhp = (OCIEnv *) 0; /* env. handle */
OCISvcCtx *svchp = (OCISvcCtx *) 0; /* service handle */
OCIError *errhp = (OCIError *) 0; /* error handle */
OCIStmt *stmthp = (OCIStmt *) 0; /* statement handle */
OCIBind *bndp = (OCIBind *) 0; /* bind handle */
int retval = (int)ODCI_SUCCESS; /* return from this function */
OCINumber *rval = (OCINumber *)0;
char delstmt[2000]; /* sql delete statement */
ODCIColInfo *colinfo; /* column info */
ODCIColInfo_ind *colinfo_ind;
boolean exists = TRUE;
unsigned int partiden; /* table partition iden */
unsigned int idxflag; /* index info flag
/* Get oci handles */
if (qxiqtce(ctx, errhp, OCIExtProcGetEnv(ctx, &envhp, &svchp, &errhp)))
return(rval);
/* set up return code */
rval = (OCINumber *)OCIExtProcAllocCallMemory(ctx, sizeof(OCINumber));
if (qxiqtce(ctx, errhp, OCINumberFromInt(errhp, (dvoid *)&retval,
sizeof(retval), OCI_NUMBER_SIGNED, rval)))
return(rval);
/* Convert idxflag to integer from OCINumber */
if (qxiqtce(ctx, errhp, OCINumberToInt(errhp, &(ix->IndexInfoFlags),
sizeof(idxflag), OCI_NUMBER_UNSIGNED, ( void *)&idxflag)))
return(rval);
/*****************************
* Construct delete Statement *
******************************/
if ((idxflag & ODCI_INDEX_RANGE_PARTN) != ODCI_INDEX_RANGE_PARTN)
(void)sprintf(delstmt, "DELETE FROM %s.%s_sbtree WHERE f2 = :rr",
OCIStringPtr(envhp, ix->IndexSchema), OCIStringPtr(envhp, ix->IndexName));
else
{
if (qxiqtce(ctx, errhp, OCICollGetElem(envhp, errhp, (OCIColl *)ix->IndexCols,
(sb4)0, &exists, (void **) &colinfo, (void **) &colinfo_ind)))
return(rval);
(void)sprintf(delstmt,
"DELETE FROM %s.%s_sbtree partition (SYS_OP_DOBJTOPNUM(%s, :partiden))
WHERE f2 = :rr",
OCIStringPtr(envhp, ix->IndexSchema), OCIStringPtr(envhp, ix->IndexName),
OCIStringPtr(envhp, colinfo->TableName));
}
/***************************************
* Parse and Execute delete Statement *
****************************************/
/* allocate stmt handle */
if (qxiqtce(ctx, errhp, OCIHandleAlloc((dvoid *)envhp, (dvoid **)&stmthp,
(ub4)OCI_HTYPE_STMT, (size_t)0, (dvoid **)0)))
return(rval);
/* prepare the statement */
if (qxiqtce(ctx, errhp, OCIStmtPrepare(stmthp, errhp, (text *)delstmt,
(ub4)strlen(delstmt), OCI_NTV_SYNTAX, OCI_DEFAULT)))
return(rval);
if ( (idxflag & ODCI_INDEX_RANGE_PARTN) == ODCI_INDEX_RANGE_PARTN)
{
/* Convert partiden to integer from OCINumber */
if (qxiqtce(ctx, errhp, OCINumberToInt(errhp, &(colinfo->TablePartitionIden),
sizeof(partiden), OCI_NUMBER_UNSIGNED, ( void *)&partiden)))
return(rval);
/* Set up bind for partiden */
if (qxiqtce(ctx, errhp, OCIBindByName(stmthp, &bndp, errhp,
(text *)":partiden", sizeof(":partiden")-1, (dvoid *)&partiden,
sb4)(sizeof(partiden)), (ub2)SQLT_INT, (dvoid *)0, (ub2 *)0,
(ub2 *)0, (ub4)0, (ub4 *)0, (ub4)OCI_DEFAULT)))
return(rval);
}
/* Set up bind for rid */
if (qxiqtce(ctx, errhp, OCIBindByName(stmthp, &bndp, errhp, (text *)":rr",
sizeof(":rr")-1, (dvoid *)rid, (sb4)(strlen(rid)+1), (ub2)SQLT_STR,
(dvoid *)0, (ub2 *)0, (ub2 *)0, (ub4)0, (ub4 *)0, (ub4)OCI_DEFAULT)))
return(rval);
/* Execute statement */
if (qxiqtce(ctx, errhp, OCIStmtExecute(svchp, stmthp, errhp, (ub4)1, (ub4)0,
(OCISnapshot *)NULL, (OCISnapshot *)NULL, (ub4)OCI_DEFAULT)))
return(rval);
/* free stmt handle */
if (qxiqtce(ctx, errhp, OCIHandleFree((dvoid *)stmthp, (ub4)OCI_HTYPE_STMT)))
return(rval);
return(rval);
}
Example 16-26 Implementing ODCIIndexUpdate() for PSBTree in C
The update routine constructs a SQL statement to update a row in the index table corresponding to the row being updated in the base table. The row in the index table is identified by the value of rowid that is passed in as a parameter to this routine. The old column value (oldval) is replaced by the new value (newval).
OCINumber *qxiqtbspu(
OCIExtProcContext *ctx,
ODCIIndexInfo *ix,
ODCIIndexInfo_ind *ix_ind,
char *rid,
short rid_ind,
char *oldval,
short oldval_ind,
char *newval,
short newval_ind,
ODCIEnv *env,
ODCIEnv_ind *env_ind)
{
OCIEnv *envhp = (OCIEnv *) 0; /* env. handle */
OCISvcCtx *svchp = (OCISvcCtx *) 0; /* service handle */
OCIError *errhp = (OCIError *) 0; /* error handle */
OCIStmt *stmthp = (OCIStmt *) 0; /* statement handle */
OCIBind *bndp = (OCIBind *) 0; /* bind handle */
int retval = (int)ODCI_SUCCESS; /* return from this function */
OCINumber *rval = (OCINumber *)0;
char updstmt[2000]; /* sql upate statement */
ODCIColInfo *colinfo; /* column info */
ODCIColInfo_ind *colinfo_ind;
boolean exists = TRUE;
unsigned int partiden; /* table partition iden */
unsigned int idxflag; /* index info flag
/* Get oci handles */
if (qxiqtce(ctx, errhp, OCIExtProcGetEnv(ctx, &envhp, &svchp, &errhp)))
return(rval);
/* set up return code */
rval = (OCINumber *)OCIExtProcAllocCallMemory(ctx, sizeof(OCINumber));
if (qxiqtce(ctx, errhp, OCINumberFromInt(errhp, (dvoid *)&retval,
sizeof(retval), OCI_NUMBER_SIGNED, rval)))
return(rval);
/* Convert idxflag to integer from OCINumber */
if (qxiqtce(ctx, errhp, OCINumberToInt(errhp, &(ix->IndexInfoFlags),
sizeof(idxflag), OCI_NUMBER_UNSIGNED, ( void *)&idxflag)))
return(rval);
/*****************************
* Construct update Statement *
******************************/
if ( (idxflag & ODCI_INDEX_RANGE_PARTN) != ODCI_INDEX_RANGE_PARTN)
(void)sprintf(updstmt, "UPDATE %s.%s_sbtree SET f1 = :newval WHERE f2 = :rr",
OCIStringPtr(envhp, ix->IndexSchema), OCIStringPtr(envhp, ix->IndexName));
else
{
if (qxiqtce(ctx, errhp, OCICollGetElem(envhp, errhp, OCIColl *)ix->IndexCols,
(sb4)0, &exists, (void **) &colinfo, (void **) &colinfo_ind)))
return(rval);
(void)sprintf(updstmt, "UPDATE %s.%s_sbtree partition
(SYS_OP_DOBJTOPNUM(%s, :partiden)) SET f1 = :newval WHERE f2 = :rr",
OCIStringPtr(envhp, ix->IndexSchema), OCIStringPtr(envhp, ix->IndexName),
OCIStringPtr(envhp, colinfo->TableName));
}
/****************************************
* Parse and Execute Create Statement *
****************************************/
/* allocate stmt handle */
if (qxiqtce(ctx, errhp, OCIHandleAlloc((dvoid *)envhp, (dvoid **)&stmthp,
(ub4)OCI_HTYPE_STMT, (size_t)0, (dvoid **)0)))
return(rval);
/* prepare the statement */
if (qxiqtce(ctx, errhp, OCIStmtPrepare(stmthp, errhp, (text *)updstmt,
(ub4)strlen(updstmt), OCI_NTV_SYNTAX, OCI_DEFAULT)))
return(rval);
if ( (idxflag & ODCI_INDEX_RANGE_PARTN) == ODCI_INDEX_RANGE_PARTN)
{
/* Convert partiden to integer from OCINumber */
if (qxiqtce(ctx, errhp, OCINumberToInt(errhp,
&(colinfo->TablePartitionIden), sizeof(partiden), OCI_NUMBER_UNSIGNED,
( void *)&partiden)))
return(rval);
/* Set up bind for partiden */
if (qxiqtce(ctx, errhp, OCIBindByName(stmthp, &bndp, errhp,
(text *)":partiden", sizeof(":partiden")-1, (dvoid *)&partiden,
(sb4)(sizeof(partiden)), (ub2)SQLT_INT, (dvoid *)0, (ub2 *)0,
(ub2 *)0, (ub4)0, (ub4 *)0, (ub4)OCI_DEFAULT)))
return(rval);
}
/* Set up bind for newval */
if (qxiqtce(ctx, errhp, OCIBindByName(stmthp, &bndp, errhp, (text *)":newval",
sizeof(":newval")-1, (dvoid *)newval, (sb4)(strlen(newval)+1),
(ub2)SQLT_STR, (dvoid *)0, (ub2 *)0, (ub2 *)0, (ub4)0, (ub4 *)0, (
ub4)OCI_DEFAULT)))
return(rval);
/* Set up bind for rid */
if (qxiqtce(ctx, errhp, OCIBindByName(stmthp, &bndp, errhp, (text *)":rr",
sizeof(":rr")-1, (dvoid *)rid, (sb4)(strlen(rid)+1), (ub2)SQLT_STR,
(dvoid *)0, (ub2 *)0, (ub2 *)0, (ub4)0, (ub4 *)0, (ub4)OCI_DEFAULT)))
return(rval);
/* Execute statement */
if (qxiqtce(ctx, errhp, OCIStmtExecute(svchp, stmthp, errhp, (ub4)1,
ub4)0, (OCISnapshot *)NULL, (OCISnapshot *)NULL, (ub4)OCI_DEFAULT)))
return(rval);
/* free stmt handle */
if (qxiqtce(ctx, errhp, OCIHandleFree((dvoid *)stmthp, (ub4)OCI_HTYPE_STMT)))
return(rval);
return(rval);
}
Example 16-27 Implementing ODCIIndexStart() for PSBTREE in C
The start routine performs the setup for an psbtree index scan. The query information in terms of the operator predicate, its arguments, and the bounds on return values are passed in as parameters to this function. The scan context that is shared among the index scan routines is an instance of the type psbtree_im.
This function sets up a cursor that scans the index table. The scan retrieves the stored rowids for the rows in the index table that satisfy the specified predicate. The predicate for the index table is generated based on the operator predicate information that is passed in as parameters. For example, if the operator predicate is of the form eq(col, 'joe') = 1, then the predicate on the index table is set up to be f1 = 'joe'.
This function uses the structs qxiqtim, qxiqtin, and qxiqtcx, which were demonstrated in Example 16-21 and Example 16-22.
OCINumber *qxiqtbsps(
OCIExtProcContext *ctx,
qxiqtim *sctx,
qxiqtin *sctx_ind,
ODCIIndexInfo *ix,
ODCIIndexInfo_ind *ix_ind,
ODCIPredInfo *pr,
ODCIPredInfo_ind *pr_ind,
ODCIQueryInfo *qy,
ODCIQueryInfo_ind *qy_ind,
OCINumber *strt,
short strt_ind,
OCINumber *stop,
short stop_ind,
char *cmpval,
short cmpval_ind,
ODCIEnv *env,
ODCIEnv_ind *env_ind)
{
sword status;
OCIEnv *envhp = (OCIEnv *) 0; /* env. handle */
OCISvcCtx *svchp = (OCISvcCtx *) 0; /* service handle */
OCIError *errhp = (OCIError *) 0; /* error handle */
OCISession *usrhp = (OCISession *) 0; /* user handle */
qxiqtcx *icx = (qxiqtcx *) 0; /* state to be saved for later calls */
int strtval; /* start bound */
int stopval; /* stop bound */
int errnum = 29400; /* choose some oracle error number */
char errmsg[512]; /* error message buffer */
size_t errmsglen; /* Length of error message */
char relop[3]; /* relational operator used in sql stmt */
char selstmt[2000]; /* sql select statement */
int retval = (int)ODCI_SUCCESS; /* return from this function */
OCINumber *rval = (OCINumber *)0;
ub4 key; /* key value set in "sctx" */
ub1 *rkey; /* key to retrieve context */
ub4 rkeylen; /* length of key */
ODCIColInfo *colinfo; /* column info */
ODCIColInfo_ind *colinfo_ind;
boolean exists = TRUE;
unsigned int partiden; /* table partition iden */
unsigned int idxflag; /* index info flag
/* Get oci handles */
if (qxiqtce(ctx, errhp, OCIExtProcGetEnv(ctx, &envhp, &svchp, &errhp)))
return(rval);
/* set up return code */
rval = (OCINumber *)OCIExtProcAllocCallMemory(ctx, sizeof(OCINumber));
if (qxiqtce(ctx, errhp, OCINumberFromInt(errhp, (dvoid *)&retval,
sizeof(retval), OCI_NUMBER_SIGNED, rval)))
return(rval);
/* get the user handle */
if (qxiqtce(ctx, errhp, OCIAttrGet((dvoid *)svchp, (ub4)OCI_HTYPE_SVCCTX,
(dvoid *)&usrhp, (ub4 *)0, (ub4)OCI_ATTR_SESSION, errhp)))
return(rval);
/**********************************************/
/* Allocate memory to hold index scan context */
/**********************************************/
if (sctx_ind ->atomic_qxiqtin == OCI_IND_NULL ||
sctx_ind ->scind_qxiqtin == OCI_IND_NULL)
{
if (qxiqtce(ctx, errhp, OCIMemoryAlloc((dvoid *)usrhp, errhp, (dvoid **)&icx,
OCI_DURATION_STATEMENT, (ub4)(sizeof(qxiqtcx)), OCI_MEMORY_CLEARED)))
return(rval);
icx->stmthp = (OCIStmt *)0;
icx->defnp = (OCIDefine *)0;
icx->bndp = (OCIBind *)0;
}
else
{
/*************************/
/* Retrieve scan context */
/*************************/
rkey = OCIRawPtr(envhp, sctx->sctx_qxiqtim);
rkeylen = OCIRawSize(envhp, sctx->sctx_qxiqtim);
if (qxiqtce(ctx, errhp, OCIContextGetValue((dvoid *)usrhp, errhp,
rkey, (ub1)rkeylen, (dvoid **)&(icx))))
return(rval);
}
/***********************************/
/* Check that the bounds are valid */
/***********************************/
/* convert from oci numbers to native numbers */
if (qxiqtce(ctx, errhp, OCINumberToInt(errhp, strt, sizeof(strtval),
OCI_NUMBER_SIGNED, (dvoid *)&strtval)))
return(rval);
if (qxiqtce(ctx, errhp, OCINumberToInt(errhp, stop, sizeof(stopval),
OCI_NUMBER_SIGNED, (dvoid *)&stopval)))
return(rval);
/* verify that strtval/stopval are both either 0 or 1 */
if (!(((strtval == 0) && (stopval == 0)) || ((strtval == 1) && (stopval == 1))))
{
strcpy(errmsg, (char *)"Incorrect predicate for sbtree operator");
errmsglen = (size_t)strlen(errmsg);
if (OCIExtProcRaiseExcpWithMsg(ctx, errnum, (text *)errmsg, errmsglen)
!= OCIEXTPROC_SUCCESS)
/* Use cartridge error services here */;
return(rval);
}
/*********************************************/
/* Generate the SQL statement to be executed */
/*********************************************/
if (memcmp((dvoid *)OCIStringPtr(envhp, pr->ObjectName), (dvoid *)"EQ", 2) == 0)
if (strtval == 1)
strcpy(relop, (char *)"=");
else
strcpy(relop, (char *)"!=");
else if
(memcmp((dvoid *)OCIStringPtr(envhp, pr->ObjectName), (dvoid *)"LT",2) == 0)
if (strtval == 1)
strcpy(relop, (char *)"<");
else
strcpy(relop, (char *)">=");
else
if (strtval == 1)
strcpy(relop, (char *)">");
else
strcpy(relop, (char *)"<=");
/* Convert idxflag to integer from OCINumber */
if (qxiqtce(ctx, errhp, OCINumberToInt(errhp, &(ix->IndexInfoFlags),
sizeof(idxflag), OCI_NUMBER_UNSIGNED, ( void *)&idxflag)))
return(rval);
if ( (idxflag & ODCI_INDEX_RANGE_PARTN) != ODCI_INDEX_RANGE_PARTN)
(void)sprintf(selstmt, "select f2 from %s.%s_sbtree where f1 %s :val",
OCIStringPtr(envhp, ix->IndexSchema), OCIStringPtr(envhp, ix->IndexName),
relop);
else
{
if (qxiqtce(ctx, errhp, OCICollGetElem(envhp, errhp, OCIColl *)ix->IndexCols,
(sb4)0, &exists, (void **) &colinfo, (void **) &colinfo_ind)))
return(rval);
/* Convert partiden to integer from OCINumber */
if (qxiqtce(ctx, errhp, OCINumberToInt(errhp, &(colinfo->TablePartitionIden),
sizeof(partiden), OCI_NUMBER_UNSIGNED, ( void *)&partiden)))
return(rval);
(void)sprintf(selstmt, "select f2 from %s.%s_sbtree partition (SYS_OP_DOBJTOPNUM(%s, %d)) where f1 %s :val",
OCIStringPtr(envhp, ix->IndexSchema), OCIStringPtr(envhp, ix->IndexName),
OCIStringPtr(envhp, colinfo->TableName), partiden, relop);
}
/***********************************/
/* Parse, bind, define and execute */
/***********************************/
if (sctx_ind ->atomic_qxiqtin == OCI_IND_NULL ||
sctx_ind ->scind_qxiqtin == OCI_IND_NULL)
{
/* allocate stmt handle */
if (qxiqtce(ctx, errhp, OCIHandleAlloc((dvoid *)envhp,
(dvoid **)&(icx->stmthp), (ub4)OCI_HTYPE_STMT, (size_t)0, (dvoid **)0)))
return(rval);
}
/* prepare the statement */
if (qxiqtce(ctx, errhp, OCIStmtPrepare(icx->stmthp, errhp, (text *)selstmt,
(ub4)strlen(selstmt), OCI_NTV_SYNTAX, OCI_DEFAULT)))
return(rval);
/* Set up bind for compare value */
if (qxiqtce(ctx, errhp, OCIBindByName(icx->stmthp, &(icx->bndp), errhp,
(text *)":val", sizeof(":val")-1, (dvoid *)cmpval, (sb4)(strlen(cmpval)+1),
(ub2)SQLT_STR, (dvoid *)0, (ub2 *)0, (ub2 *)0, (ub4)0, (ub4 *)0,
(ub4)OCI_DEFAULT)))
return(rval);
/* Set up define */
if (qxiqtce(ctx, errhp, OCIDefineByPos(icx->stmthp, &(icx->defnp), errhp,
(ub4)1, (dvoid *)(icx->ridp), (sb4) sizeof(icx->ridp), (ub2)SQLT_STR,
(dvoid *)0, (ub2 *)0, (ub2 *)0, (ub4)OCI_DEFAULT)))
return(rval);
/* execute */
if (qxiqtce(ctx, errhp, OCIStmtExecute(svchp, icx->stmthp, errhp, (ub4)0,
(ub4)0, (OCISnapshot *)NULL, (OCISnapshot *)NULL, (ub4)OCI_DEFAULT)))
return(rval);
/************************************/
/* Set index context to be returned */
/************************************/
if (sctx_ind ->atomic_qxiqtin == OCI_IND_NULL ||
sctx_ind ->scind_qxiqtin == OCI_IND_NULL)
{
/* generate a key */
if (qxiqtce(ctx, errhp, OCIContextGenerateKey((dvoid *)usrhp, errhp, &key)))
return(rval);
/* set the memory address of the struct to be saved in the context */
if (qxiqtce(ctx, errhp, OCIContextSetValue((dvoid *)usrhp, errhp,
OCI_DURATION_STATEMENT, (ub1 *)&key, (ub1)sizeof(key), (dvoid *)icx)))
return(rval);
/* statement duration memory alloc for key */
if (qxiqtce(ctx, errhp, OCIMemoryAlloc(( void *)usrhp, errhp,
( void **)&(sctx->sctx_qxiqtim), OCI_DURATION_STATEMENT,
(sb4)(sizeof(key)+sizeof(ub4)), OCI_MEMORY_CLEARED)))
return(rval);
/* set the key as the member of "sctx" */
if (qxiqtce(ctx, errhp, OCIRawAssignBytes(envhp, errhp, (ub1 *)&key,
ub4)sizeof(key), &(sctx->sctx_qxiqtim))))
return(rval);
sctx_ind->atomic_qxiqtin = OCI_IND_NOTNULL;
sctx_ind->scind_qxiqtin = OCI_IND_NOTNULL;
return(rval);
}
return(rval);
}
Example 16-28 Implementing ODCIIndexFetch() for PSBTREE in C
The scan context set up by the start routine is passed in as a parameter to the fetch routine. This function first retrieves the 4-byte key from the scan context. The C mapping for the scan context is qxiqtim (see Example 16-21). Next, key is used to look up the OCI context. This gives the memory address of the qxiqtcx structure (see Example 16-22) that holds the OCI handles.
This function returns the next batch of rowids that satisfy the operator predicate. It uses the value of the nrows parameter as the size of the batch. It repeatedly fetches rowids from the open cursor and populates the rowid list. When the batch is full or when there are no more rowids left, the function returns them back to the Oracle server.
OCINumber *qxiqtbspf(
OCIExtProcContext *ctx,
qxiqtim *self,
qxiqtin *self_ind,
OCINumber *nrows,
short nrows_ind,
OCIArray **rids,
short *rids_ind,
ODCIEnv *env,
ODCIEnv_ind *env_ind)
{
sword status;
OCIEnv *envhp = (OCIEnv *) 0; /* env. handle */
OCISvcCtx *svchp = (OCISvcCtx *) 0; /* service handle */
OCIError *errhp = (OCIError *) 0; /* error handle */
OCISession *usrhp = (OCISession *) 0; /* user handle */
qxiqtcx *icx = (qxiqtcx *) 0; /* state to be saved for later calls */
int idx = 1;
int nrowsval;
OCIArray *ridarrp = *rids; /* rowid collection */
OCIString *ridstr = (OCIString *)0;
int done = 0;
int retval = (int)ODCI_SUCCESS;
OCINumber *rval = (OCINumber *)0;
ub1 *key; /* key to retrieve context */
ub4 keylen; /* length of key */
/*******************/
/* Get OCI handles */
/*******************/
if (qxiqtce(ctx, errhp, OCIExtProcGetEnv(ctx, &envhp, &svchp, &errhp)))
return(rval);
/* set up return code */
rval = (OCINumber *)OCIExtProcAllocCallMemory(ctx, sizeof(OCINumber));
if (qxiqtce(ctx, errhp, OCINumberFromInt(errhp, (dvoid *)&retval,
sizeof(retval), OCI_NUMBER_SIGNED, rval)))
return(rval);
/* get the user handle */
if (qxiqtce(ctx, errhp, OCIAttrGet((dvoid *)svchp, (ub4)OCI_HTYPE_SVCCTX,
(dvoid *)&usrhp, (ub4 *)0, (ub4)OCI_ATTR_SESSION, errhp)))
return(rval);
/********************************/
/* Retrieve context from key */
/********************************/
key = OCIRawPtr(envhp, self->sctx_qxiqtim);
keylen = OCIRawSize(envhp, self->sctx_qxiqtim);
if (qxiqtce(ctx, errhp, OCIContextGetValue((dvoid *)usrhp, errhp, key,
(ub1)keylen, (dvoid **)&(icx))))
return(rval);
/* get value of nrows */
if (qxiqtce(ctx, errhp, OCINumberToInt(errhp, nrows, sizeof(nrowsval),
OCI_NUMBER_SIGNED, (dvoid *)&nrowsval)))
return(rval);
/****************/
/* Fetch rowids */
/****************/
while (!done)
{
if (idx > nrowsval)
done = 1;
else
{
status =OCIStmtFetch(icx->stmthp, errhp, (ub4)1, (ub2) 0, (ub4)OCI_DEFAULT);
if (status == OCI_NO_DATA)
{
short col_ind = OCI_IND_NULL;
/* have to create dummy oci string */
OCIStringAssignText(envhp, errhp, (text *)"dummy", (ub2)5, &ridstr);
/* append null element to collection */
if (qxiqtce(ctx, errhp, OCICollAppend(envhp, errhp, (dvoid *)ridstr,
(dvoid *)&col_ind, (OCIColl *)ridarrp)))
return(rval);
done = 1;
}
else if (status == OCI_SUCCESS)
{
OCIStringAssignText(envhp, errhp, (text *)icx->ridp, (ub2)18,
OCIString **)&ridstr);
/* append rowid to collection */
if (qxiqtce(ctx, errhp, OCICollAppend(envhp, errhp, (dvoid *)ridstr,
(dvoid *)0, (OCIColl *)ridarrp)))
return(rval);
idx++;
}
else if (qxiqtce(ctx, errhp, status))
return(rval);
}
}
/* free ridstr finally */
if (ridstr &&
(qxiqtce(ctx, errhp, OCIStringResize(envhp, errhp, (ub4)0, &ridstr))))
return(rval);
*rids_ind = OCI_IND_NOTNULL;
return(rval);
}
Example 16-29 Implementing ODCIIndexClose() for PSBTREE in C
The scan context set up by the start routine is passed in as a parameter to the close routine. This function first retrieves the 4-byte key from the scan context. The C mapping for the scan context is qxiqtim (see Example 16-21). Next, the OCI context is looked up based on the key. This gives the memory address of the structure that holds the OCI handles, the qxiqtcx structure (see Example 16-22).
This function closes and frees all the OCI handles. It also frees the memory that was allocated in the start routine.
OCINumber *qxiqtbspc(
OCIExtProcContext *ctx,
qxiqtim *self,
qxiqtin *self_ind,
ODCIEnv *env,
ODCIEnv_ind *env_ind)
{
sword status;
OCIEnv *envhp = (OCIEnv *) 0; /* env. handle */
OCISvcCtx *svchp = (OCISvcCtx *) 0; /* service handle */
OCIError *errhp = (OCIError *) 0; /* error handle */
OCISession *usrhp = (OCISession *) 0; /* user handle */
qxiqtcx *icx = (qxiqtcx *) 0; /* state to be saved for later calls */
int retval = (int) ODCI_SUCCESS;
OCINumber *rval = (OCINumber *)0;
ub1 *key; /* key to retrieve context */
ub4 keylen; /* length of key */
if (qxiqtce(ctx, errhp, OCIExtProcGetEnv(ctx, &envhp, &svchp, &errhp)))
return(rval);
/* set up return code */
rval = (OCINumber *)OCIExtProcAllocCallMemory(ctx, sizeof(OCINumber));
if (qxiqtce(ctx, errhp, OCINumberFromInt(errhp, (dvoid *)&retval,
sizeof(retval), OCI_NUMBER_SIGNED, rval)))
return(rval);
/* get the user handle */
if (qxiqtce(ctx, errhp, OCIAttrGet((dvoid *)svchp, (ub4)OCI_HTYPE_SVCCTX,
(dvoid *)&usrhp, (ub4 *)0,
(ub4)OCI_ATTR_SESSION, errhp)))
return(rval);
/********************************/
/* Retrieve context using key */
/********************************/
key = OCIRawPtr(envhp, self->sctx_qxiqtim);
keylen = OCIRawSize(envhp, self->sctx_qxiqtim);
if (qxiqtce(ctx, errhp, OCIContextGetValue((dvoid *)usrhp, errhp, key,
(ub1)keylen, (dvoid **)&(icx))))
return(rval);
/* Free handles and memory */
if (qxiqtce(ctx, errhp, OCIHandleFree((dvoid *)icx->stmthp,
(ub4)OCI_HTYPE_STMT)))
return(rval);
if (qxiqtce(ctx, errhp, OCIMemoryFree((dvoid *)usrhp, errhp, (dvoid *)icx)))
return(rval);
/* free the memory allocated for the index context. */
if (qxiqtce(ctx, errhp, OCIContextClearValue((dvoid *)usrhp, errhp, key,
(ub1)keylen)))
return(rval);
return(rval);
}
You should next create the indextype object and specify the list of operators that it supports. In addition, specify the name of the implementation type that implements the ODCIIndexXXX() interface routines. This step is demonstrated in Example 16-30.
One typical usage scenario is to create a range partitioned table and populate it, as demonstrated in Example 16-31.
Example 16-31 Creating and Populating a Partitioned Table for PSBTREE
CREATE TABLE t1 (f1 NUMBER, f2 VARCHAR2(200)) PARTITION BY RANGE(f1) ( PARTITION p1 VALUES LESS THAN (101), PARTITION p2 VALUES LESS THAN (201), PARTITION p3 VALUES LESS THAN (301), PARTITION p4 VALUES LESS THAN (401) ); INSERT INTO t1 VALUES (10, 'aaaa'); INSERT INTO t1 VALUES (200, 'bbbb'); INSERT INTO t1 VALUES (100, 'cccc'); INSERT INTO t1 VALUES (300, 'dddd'); INSERT INTO t1 VALUES (400, 'eeee'); COMMIT;
You can then create a psbtree index on column f2. The CREATE INDEX statement specifies the indextype that should be used, as demonstrated in Example 16-32.
Example 16-32 Creating a PSBTREE Index on a Column
CREATE INDEX it1 ON t1(f2) iINDEXTYPE IS psbtree LOCAL
(PARTITION pe1 PARAMETERS('test1'), PARTITION pe2,
PARTITION pe3, PARTITION pe4 PARAMETERS('test4'))
PARAMETERS('test');
To execute a query that uses one of the psbtree operators, use the code in Example 16-33
Example 16-33 Using PSBTREE Operators in a Query
SELECT * FROMM t1 WHERE eq(f2, 'dddd') = 1 AND f1>101 ;
The explain plan output for this query should look like this:
OPERATION OPTIONS PARTITION_START PARTITION_STOP -------------------------------------------------------------------------------- SELECT STATEMENT PARTITION RANGE ITERATOR 2 4 TABLE ACCESS BY LOCAL INDEX ROWID 2 4 DOMAIN INDEX