3 Managing Network Address Information

This chapter describes how network address information for Oracle Net Services can be stored in local files or in a centralized directory server. Using localized management, network address information is stored in tnsnames.ora files on each computer in the network. Using centralized management, network address information is stored in centralized directory server.

The chapter contains the following topics:

Using Localized Management
Using a Directory Server for Centralized Management

Using Localized Management

When localized management is used, network computers are configured with the files described in Table 3-1. The files are stored locally on the computers.

Table 3-1 Oracle Net Configuration Files Used with Localized Management

Configuration File	Description
`tnsnames.ora`	Located primarily on the clients, this file contains net service names mapped to connect descriptors. This file is used for the local naming method.
`sqlnet.ora`	Located on client and database server computers, this file may include: Client domain to append to unqualified service names or net service names Order of naming methods the client should use when resolving a name Logging and tracing features to use Route of connections External naming parameters Oracle Advanced Security parameters Database access control parameters
`listener.ora`	Located on the database server, this configuration file for the listener may include: Protocol addresses it is accepting connection requests on Database and nondatabase services it is listening for Control parameters used by the listener
`cman.ora`	Located on the computer where Oracle Connection Manager runs, this configuration file includes the following components: A listening endpoint Access control rule list Parameter list Each Oracle Connection Manager configuration is encapsulated within a single name-value (NV) string, which consists of the preceding components.

Configuration files are typically created in the ORACLE_HOME/network/admin directory. However, configuration files can be created in other directories. Oracle Net will check the other directories for the configuration files. For example, the order checking the tnsnames.ora file is as follows:

The directory specified by the TNS_ADMIN environment variable. If the file is not found in the directory specified, then it is assumed that the file does not exist.
If the TNS_ADMIN environment variable is not set, then Oracle Net will check the ORACLE_HOME/network/admin directory.

Note:

On Microsoft Windows, the TNS_ADMIN environment variable is used if it is set in the environment of the process. If the TNS_ADMIN environment variable is not defined in the environment, or the process is a service which does not have an environment, then Microsoft Windows scans the registry for a TNS_ADMIN parameter.

See Also:

Oracle operating system-specific documentation

Using a Directory Server for Centralized Management

When an Oracle network uses a directory server, the directory server manages global database links as net service names for the Oracle databases in the network. Users and programs can use a global link to access objects in the corresponding database.

Oracle Net Services uses a centralized directory server as one of the primary methods for storing connect identifiers. Clients use the connect identifiers in their connect string, and the directory server resolves the connect identifier to a connect descriptor that is passed back to the client. This feature is called directory naming. This type of infrastructure reduces the cost of managing and configuring resources in a network.

Oracle Internet Directory provides a centralized mechanism for managing and configuring a distributed Oracle network. The directory server can replace client-side and server-side localized tnsnames.ora files.

Figure 3-1 shows a client resolving a connect identifier through a directory server.

The client contacts to the directory server to resolve a connect identifier to a connect descriptor.
The directory server resolves the connect identifier and retrieves the connect descriptor for the client.
The client sends the connection request to the listener, using the connect descriptor.

Figure 3-1 Client Using a Directory Server to Resolve a Connect Identifier

Description of "Figure 3-1 Client Using a Directory Server to Resolve a Connect Identifier"

Note:

Java Database Connectivity (JDBC) Drivers support directory naming. See the Oracle Database JDBC Developer's Guide and Reference for additional information.

This section contains the following topics:

Understanding the Directory Information Tree
Understanding Oracle Context
Understanding Net Service Alias Entries
Who Can Add or Modify Entries in the Directory Server
Client Connections Using Directory Naming
Considerations When Using Directory Servers
Limitations of Directory Naming Support with Microsoft Active Directory

Understanding the Directory Information Tree

Directory servers store information in a hierarchical namespace structure called a directory information tree (DIT). Each node in the tree is called an entry. Oracle Net Services uses both the tree structure and specific entries in the tree. DITs are commonly aligned with an existing domain structure such as a Domain Name System (DNS) structure or a geographic and organization structure.

Figure 3-2 shows a DIT structured according to DNS domain components.

Figure 3-2 DNS Domain Component DIT

Description of "Figure 3-2 DNS Domain Component DIT"

Figure 3-3 shows a DIT structured according to country, organization, and organizational units. This structure is commonly referred to as an X.500 DIT.

Figure 3-3 X.500 DIT

Description of "Figure 3-3 X.500 DIT"

For example, consider Figure 3-4. The cn=sales and cn=db1 entries represent a net service name and a database service, respectively. Additional entries under cn=sales and cn=db1 contain the connect descriptor information. These entries are not represented in the graphic. The cn=sales and cn=db1 entries enable clients to connect to the database using connect strings CONNECT username@sales and CONNECT username@db1.

Figure 3-4 Database Service and Net Service Entries in a DIT

Description of "Figure 3-4 Database Service and Net Service Entries in a DIT"

Each entry is uniquely identified by a distinguished name (DN). The DN indicates exactly where the entry resides in the directory server hierarchy. The DN for db1 is dn:cn=db1,cn=OracleContext,dc=jp,dc=example,dc=com. The DN for sales is dn:cn=sales,cn=OracleContext,dc=jp,dc=example,dc=com. The format of a DN places the lowest component of the DIT to the left, then moves progressively up the DIT.

Each DN is made up of a sequence of relative distinguished names (RDNs). The RDN consists of an attribute, such as cn, and a value, such as db1 or sales. The RDN for db1 is cn=db1, and the RDN for sales is cn=sales. The attribute and its value uniquely identify the entry.

Fully-qualified Names for Domain Component Namespaces

For domain component namespaces, the default directory entry defined for the client must be in one of the following formats:

dc[,dc][...]

ou,dc[,dc][...]

In the preceding syntax, [dc] represents an optional domain component and [...] represents additional domain component entries.

The fully-qualified name used in the connect identifier by the client must be in one of the following formats:

cn.dc[.dc][...]

cn[.ou]@dc[.dc][...]

In the preceding syntax, [cn] represents the Oracle Net entry.

Example 3-1 Using a Fully-qualified Name with an Organizational Unit

Consider a directory server that contains an entry for database object sales with a DN of cn=sales,cn=OracleContext,dc=jp,dc=example,dc=com. In this example, the client requires a connect identifier of sales.jp.example.com.

Consider a similar entry that contains database object sales with a DN of cn=sales,cn=OracleContext,ou=mktg,dc=jp,dc=example,dc=com.

Because domain components must be separated from organization units, the client must use the format cn.ou@dc.dc.dc. The client requires the connect identifier to be sales.mktg@jp.example.com.

Figure 3-5 illustrates the preceding example.

Figure 3-5 Fully-qualified Name for Domain Component Namespaces

Description of "Figure 3-5 Fully-qualified Name for Domain Component Namespaces"

Fully-qualified Names for X.500 Namespaces

For X.500 namespaces, the default directory entry defined for the client must be in one of the following formats:

[ou],o

[ou],o,c

In the preceding formats, [ou] represents an optional organizational unit name.

The fully-qualified name the client uses as the connect identifier must be in one of the following formats:

cn[.ou].o

cn[.ou].o.c

In the preceding formats, [cn] represents the Oracle Net entry.

For example, if the directory contains database object sales with a DN of cn=sales,cn=OracleContext,ou=mktg,o=example,c=jp, then the client requires a connect identifier of sales.mktg.example.jp. Figure 3-6 illustrates this example.

Figure 3-6 Fully-qualified Name for X.500 Namespaces

Description of "Figure 3-6 Fully-qualified Name for X.500 Namespaces"

Using an Entry's Relative Name

If a client is configured with a default realm Oracle Context, then an entry can be identified by its relative name, and the service can be referred to by its common name. A relative name can be used if the entry is in the same Oracle Context that was configured to be the default Oracle Context for the client's Oracle home.

Consider a directory server that contains an entry for a database called sales with a DN of dn:cn=sales,cn=OracleContext,o=example,c=us, as shown in Figure 3-7. If the client is configured with a default realm Oracle Context of cn=OracleContext,o=example,c=us, then the connect identifier can simply be sales.

Figure 3-7 Relative Naming

Description of "Figure 3-7 Relative Naming"

Note:

The JDBC OCI Driver supports both relative and full-qualified naming. The JDBC Thin Driver supports fully-qualified naming only when the complete DN is used.

See Also:

Oracle Internet Directory Administrator's Guide for additional information about how clients locate a directory
Oracle Database JDBC Developer's Guide and Reference for additional information about JDBC drivers

Using an Entry's Fully-qualified Name

Consider the same directory structure as shown Figure 3-7, but with the client's Oracle home configured with a default realm Oracle Context of cn=OracleContext,o=example,c=jp.

Because the client is configured with a default Oracle Context that does not match the location of sales in the directory server, a connect string that uses sales does not work. Instead, the client must specifically identify the location of sales, which can be done in one of the following ways:

The entry's complete DN can be used in the connect string, for example:
```
CONNECT username@"cn=sales,cn=OracleContext,o=example,c=us"
Enter password: password
```
JDBC Thin drivers support fully-qualified naming only when the complete DN is used. However, many applications do not support the use of a DN.
The entry can be referred to by a fully-qualified DNS-style name which is mapped by the Directory Naming adapter to the full x.500 DN of the database object in the LDAP directory, for example:
```
CONNECT username@sales.example.us
Enter password: password
```

Note:

JDBC OCI Drivers support fully-qualified naming. JDBC Thin Drivers support fully-qualified naming only when the complete DN is used. See the Oracle Database JDBC Developer's Guide and Reference for additional information.

Understanding Oracle Context

In Figure 3-8, the entries db1 and sales reside under cn=OracleContext. This entry is a special RDN called an Oracle Context. The entries under Oracle Context support various directory-enabled features, including directory naming.

Figure 3-8 Oracle Context in the DIT

Description of "Figure 3-8 Oracle Context in the DIT"

During directory configuration, you set the default Oracle Context. Clients use this Oracle Context as the default location to look up connect identifiers in the directory server. With Oracle Internet Directory, an Oracle Context located at the root of the DIT, with DN of dn:cn=OracleContext, points to a default Oracle Context in an identity management realm. An identity management realm is a collection of identities governed by the same administrative policies. This Oracle Context is referred to as a realm Oracle Context. Unless configured to use another Oracle Context, clients use this realm-specific Oracle Context.

The default Oracle Context affects the connect string. For example, if a client must access the db1 and sales entry frequently, then a reasonable default Oracle Context would be dc=jp,dc=example,dc=com. If a client directory entry does not match the directory entry where a service is located, then the client must specify an entry's fully-qualified name in the connect string, as described in "Client Connections Using Directory Naming".

Note:

The RDN cn=OracleContext does not have to be explicitly specified in the connect string.

See Also:

Oracle Internet Directory Administrator's Guide for additional information about an identity management realm

Understanding Net Service Alias Entries

Directory naming enables you to create net service alias entries in addition to database service and net service name entries. A net service alias is an alternative name for a net service name or database service. A net service alias entry does not have connect descriptor information. Instead, it references the location of the entry for which it is an alias. When a client requests a directory lookup of a net service alias, the directory determines that the entry is a net service alias and completes the lookup as if it is the referenced entry. For example, in Figure 3-9, a net service alias of db1alias is created for a database service of db1. When db1alias is used to connect to a database service, as in CONNECT username@db1alias, it will actually resolve to and use the connect descriptor information for db1.

Figure 3-9 Net Service Alias db1alias in a Directory Server

Description of "Figure 3-9 Net Service Alias db1alias in a Directory Server"

There are several uses for using net service aliases. As shown in Figure 3-9, a net service alias can be useful as a way for clients to refer to a net service name by another name. Another use is to have a net service alias in one Oracle Context for a database service or net service name in a different Oracle Context. This enables a database service or net service name to be defined once in the directory server, but referred to by clients that use other Oracle Contexts.

In Figure 3-10, database service db1 resides in dc=jp,dc=example,dc=com. A net service alias named db1 is created in dc=us,dc=example,dc=com. This enables clients in both Japan and the United States to use the connect string CONNECT username@db1 as opposed to clients in the Unites States needing to specify CONNECT username@db1.jp.example.com.

Figure 3-10 Net Service Alias db1 in a Directory Server

Description of "Figure 3-10 Net Service Alias db1 in a Directory Server"

Who Can Add or Modify Entries in the Directory Server

Database Configuration Assistant creates database service entries during or after installation. You can then use Oracle Enterprise Manager or Oracle Net Manager to modify the Oracle Net attributes of the database service entries. You can also use these tools to create net service name and net service alias entries.

To use these configuration tools, a DIT structure containing a root Oracle Context and identity management realm must exist. The directory administrator creates this structure with Oracle Internet Directory Configuration Assistant. For some deployments, the directory administrator may need to create additional Oracle Contexts. Additional Oracle Contexts are usually used to subdivide large sites, or separate a production environment from a test environment.

Certain tools are used by certain groups, and you must be a member of the group to use the tools, as shown in the following:

To create a database service entry with Database Configuration Assistant:
- OracleDBCreators group (cn=OracleDBCreators,cn=OracleContext...)
- OracleContextAdmins group (cn=OracleContextAdmins,cn=Groups,cn=OracleContext...)
To create net service names or net service aliases with Oracle Net Manager:
- OracleNetAdmins group (cn=OracleNetAdmins,cn=OracleContext...)
- OracleContextAdmins group

The OracleContextAdmins group is a super-user group for Oracle Context. Members of the OracleContextAdmins group can add all supported types of entries to Oracle Context.

The directory user that created Oracle Context is automatically added to these groups. Other users can be added to these groups by the directory administrator.

See Also:

"Configuring the Directory Naming Method" for additional information about using Oracle Net Manager
Oracle Database Administrator's Guide for additional information about how to register a database service with Database Configuration Assistant

Client Connections Using Directory Naming

Most clients need to perform name lookups in the directory server. To perform a lookup, the directory server must allow anonymous authentication. Directory servers usually do this by default.

To look up entries, a client must be able to find the directory server in which that entry resides. Clients locate a directory server in one of two ways:

Dynamically using DNS. In this case, the directory server location information is stored and managed in a central domain name server. The client, at request processing time, retrieves this information from DNS.
Statically in the directory server usage file, ldap.ora, created by Oracle Internet Directory Configuration Assistant and stored on the client host.

After a directory is found, clients are directed to the realm Oracle Context from the root Oracle Context.

Clients make connections to a database using connect identifiers in the same way they might use other naming methods. A connect identifier can be a database service, net service name, or net service alias. These can be referred to by their common names, or they can require additional directory location information. The default Oracle Context determines how the connect identifier must be specified, either by the entry's relative name or its fully-qualified name.

Considerations When Using Directory Servers

The following considerations should be reviewed when using directory servers:

Performance Considerations
Security Considerations
Object Classes

Performance Considerations

Connect identifiers are stored in a directory server for all clients to access. Depending on the number of clients, there can be a significant load on a directory server.

During a connect identifier lookup, a name is searched under a specific Oracle Context. Users expect relatively quick performance so the database connect time is not affected. Because of the scope of the lookup, users may begin to notice slow connect times if lookups takes more than one second.

You can resolve performance problems by changing the network topology or implementing replication.

See Also:

Directory server vendor documentation for details on resolving performance issues

Security Considerations

Administrative clients can create and modify entries in the directory server, so security is essential. This section contains the following security-related topics:

Authentication Methods
Access Control Lists

Authentication Methods

Clients use different methods of authentication depending upon the task that is to be performed.

Clients that perform lookups for information in the directory server typically use anonymous authentication. In Oracle Database 11g, it is possible to configure clients to authenticate their LDAP bind during name lookup. Sites that need to protect their net service data or disable anonymous binds to the directory must configure their clients to use wallets to authenticate during name lookup. These clients require setting the following two parameters in the sqlnet.ora file:
```
names.ldap_authenticate_bind = TRUE
wallet_location = location_value
```
Clients that administer the directory server entries authenticate with the directory server. Database Configuration Assistant or Oracle Net Manager may be used to add or modify the entries. Only authenticated users with proper privileges can modify entries. Use one of the following authentication methods:
- Simple Authentication
  
  The client identifies itself to the directory server by means of a DN and a password. The server verifies that the DN and password sent by the client matches the DN and password stored in the directory server.
- Strong Authentication
  
  The client identifies itself to the directory server by means of a public-key encryption available with Secure Sockets Layer (SSL). In public-key encryption, the sender of a message encrypts the message with the public key of the recipient. Upon delivery, the recipient decrypts the message using the recipient's private key.

Access Control Lists

Authentication is used with access control lists (ACLs) to determine whether clients can read, modify, or add information in the directory server.

ACLs specify the following:

The entries that the user can access.
The authentication method used to access the entry.
The access rights, or what the user can do with the object, such as read/write.

ACLs are established for a group of users. During Oracle Context creation, the OracleDBCreators, OracleNetAdmins, and OracleContextAdmins groups are created.

The user who creates Oracle Context using Oracle Net Configuration Assistant is automatically added as the first member of these groups.

Table 3-2 describes ACL requirements for these groups, anonymous users, and their relation to Oracle Net entries in the directory server.

Table 3-2 ACL Requirements for User Groups

Group	ACL Requirements
Anonymous users	All Oracle Net attributes and objects in the directory server have read access for the anonymous user. Read access of these objects for anonymous is also applied to Oracle Context. This enables anonymous users to browse directory naming entries contained within the `cn=OracleContext` RDN. This does not include objects used for enterprise user security. Oracle Net Configuration Assistant sets up this access during client installation.
`OracleContextAdmins` group users	Members of `OracleContextAdmins` (`cn=OracleContextAdmins,cn=Groups,cn=OracleContext,...`) have create, modify, and read access to all directory naming objects. Oracle Net Configuration Assistant establishes these access rights for this group during Oracle Context creation. In addition to the Oracle Context creator, other users can be added to this group by the directory administrator using Oracle Enterprise Manager.
`OracleDBCreators` group users	Members of `OracleDBCreators` (`cn=OracleDBCreators,cn=OracleContext,...`) have create and read access to database service objects and attributes. Oracle Net Configuration Assistant establishes the access rights for this group during Oracle Context creation. In addition to the Oracle Context creator, other users can be added to this group by the directory administrator with Oracle Enterprise Manager.
`OracleNetAdmins` group users	Members of `OracleNetAdmins` (`cn=OracleNetAdmins,cn=OracleContext,...`) have create, modify, and read access to directory naming objects and attributes. Oracle Net Configuration Assistant establishes these access rights for this group during Oracle Context creation. In addition to the Oracle Context creator, other users can be added to this group by the directory administrator.

Situations in which a high degree of security is desired for lookup or read-access to Oracle Net Services name and related data, administrators can define additional read-access control for some or all of the data. Such ACL definitions can prevent anonymous users from reading the Oracle Net Services data. If read-access to Oracle Net Services data is restricted, then clients must use authenticated binds to do name lookup.

There are no predefined groups or procedures for the Oracle configuration tools for defining read-access restrictions on this data, so administrators must use standard object management tools from their directory system to manually create any necessary groups and ACLs.

ACLs can be added to Oracle Net Services objects using ldapmodify and an LDIF-format file. The following example restricts all access for user, cn=user1:

dn: cn=sales,cn=oraclecontext,dc=example,dc=com
replace: orclentrylevelaci
orclentrylevelaci: access to attr=(*)
 by dn="cn=user1" (noread,nosearch,nowrite,nocompare)

The preceding example illustrates the basic form of an ACL for a single object. This approach is not necessarily the best way to define access because access definitions for objects are complex and may involve security properties which are inherited from parent nodes in the DIT. Oracle recommends that administrators refer to the documentation for their directory systems, and integrate access management for Oracle Net Services objects into a directory-wide policy and security implementation.

For Oracle Internet Directory directories, oidadmin has functionality to create users, groups, and also define ACLs for objects and general directory security.

See Also:

Documentation from your directory server vendor for information about how to set ACLs on directory entry
"Authentication Methods" for information about configuring clients to use authenticated binds for name lookup
Oracle Database Advanced Security Administrator's Guide for additional information about the OracleDBCreators group
"About the OracleNetAdmins Group" for information about adding users to the OracleNetAdmins group
Oracle Internet Directory Administrator's Guide

Object Classes

Directories must be populated with the correct version of the Oracle schema before Oracle Context, a database service or net service name entry can be created. The Oracle schema defines the type of objects, called object classes, that can be stored in the directory server and their attributes. Table 3-3 lists the object classes for database service, net service name, and net service alias entries.

Table 3-3 Oracle Net Services LDAP Main Object Classes

Object Class	Description
`orclDbServer`	Defines the attributes for database service entries
`orclNetService`	Defines the attributes for net service name entries
`orclNetServiceAlias`	Defines the attributes for net service alias entries

Table 3-4 lists the object classes used by orclDbServer, orclNetService, and orclNetServiceAlias.

Table 3-4 Oracle Net Services LDAP Derived Object Classes

Object Class	Description
`orclNetAddress`	Defines a listener protocol address
`orclNetAddressList`	Defines a list of addresses
`orclNetDescription`	Specifies a connect descriptor containing the protocol address of the database and the connect information to the service
`orclNetDescriptionList`	Defines a list of connect descriptors

These object classes use attributes that specify the contents of connect descriptors.

See Also:

Oracle Database Net Services Reference for additional information about these object classes and their attributes

Limitations of Directory Naming Support with Microsoft Active Directory

In addition to Oracle Internet Directory, directory naming support is also provided with Microsoft Active Directory with the following limitations:

Clients running Microsoft Windows operating system can use Microsoft Active Directory to resolve net services names, even when the database is running on an operating system that is not Microsoft Windows.
Oracle Database can use Microsoft Active Directory for name resolution for outbound network connections, such as database links or Oracle Data Guard, only if the database is running on a Microsoft Windows platform.
Configuration of net services names can only be done using Oracle Net Manager running from a Microsoft Windows platform.
Client computers and the database server must run on Microsoft Windows operating systems to access or create entries in Microsoft Active Directory.
The following features are not supported by Microsoft Active Directory:
- Multiple Oracle Contexts
  
  Microsoft Active Directory can support only one Oracle Context.
- Net service aliases
  
  You cannot create net service aliases in Microsoft Active Directory. However, you can create net service names.
- Automatic client discovery of directory servers for clients
  
  You must statically configure directory server usage on the clients. The Oracle Internet Directory Configuration will not provide directory server usage for Microsoft Active Directory. You must use Oracle Net Configuration Assistant.

See Also:

Microsoft Active Directory documentation for Microsoft-specific information