23 Replication Catalog Views

When you install replication capabilities at a site, Oracle installs the replication catalog, which consists of tables and views, at that site.

This chapter contains this topic:

Summary of Replication Catalog Views

Caution:

Do not modify the replication catalog tables directly. Instead, use the procedures provided in the DBMS_REPCAT package.

Summary of Replication Catalog Views

Many data dictionary tables have three corresponding views:

An ALL_ view displays all the information accessible to the current user, including information from the current user's schema as well as information from objects in other schemas, if the current user has access to those objects by way of grants of privileges or roles.
A DBA_ view displays all relevant information in the entire database. DBA_ views are intended only for administrators. They can be accessed only by users with the SELECT ANY TABLE privilege. This privilege is assigned to the DBA role when Oracle is initially installed.
A USER_ view displays all the information from the schema of the current user. No special privileges are required to query these views.

The columns of the ALL_, DBA_, and USER_ views corresponding to a single data dictionary table are usually nearly identical. Therefore, these views are described in full only once in this chapter (for the ALL_ view). The views are listed without the full description for DBA_ and USER_ views, but differences are noted.

As shown in Figure 23-1, the replication catalog views are used by master sites and materialized view sites to determine such information as what objects are being replicated, where they are being replicated, and if any errors have occurred during replication. Table 23-1 lists all of the replication catalog views.

Figure 23-1 Replication Catalog Views and Replicated Objects

Description of "Figure 23-1 Replication Catalog Views and Replicated Objects"

Table 23-1 Replication Catalog Views

ALL_ Views	DBA_ Views	USER_ Views
N/A	DBA_REGISTERED_MVIEW_GROUPS	N/A
ALL_REPCAT_REFRESH_TEMPLATES	DBA_REPCAT_REFRESH_TEMPLATES	USER_REPCAT_REFRESH_TEMPLATES
ALL_REPCAT_TEMPLATE_OBJECTS	DBA_REPCAT_TEMPLATE_OBJECTS	USER_REPCAT_TEMPLATE_OBJECTS
ALL_REPCAT_TEMPLATE_PARMS	DBA_REPCAT_TEMPLATE_PARMS	USER_REPCAT_TEMPLATE_PARMS
ALL_REPCAT_TEMPLATE_SITES	DBA_REPCAT_TEMPLATE_SITES	USER_REPCAT_TEMPLATE_SITES
ALL_REPCAT_USER_AUTHORIZATIONS	DBA_REPCAT_USER_AUTHORIZATIONS	USER_REPCAT_USER_AUTHORIZATION
ALL_REPCAT_USER_PARM_VALUES	DBA_REPCAT_USER_PARM_VALUES	USER_REPCAT_USER_PARM_VALUES
ALL_REPCATLOG	DBA_REPCATLOG	USER_REPCATLOG
ALL_REPCOLUMN	DBA_REPCOLUMN	USER_REPCOLUMN
ALL_REPCOLUMN_GROUP	DBA_REPCOLUMN_GROUP	USER_REPCOLUMN_GROUP
ALL_REPCONFLICT	DBA_REPCONFLICT	USER_REPCONFLICT
ALL_REPDDL	DBA_REPDDL	USER_REPDDL
N/A	DBA_REPEXTENSIONS	N/A
ALL_REPGENOBJECTS	DBA_REPGENOBJECTS	USER_REPGENOBJECTS
ALL_REPGROUP	DBA_REPGROUP	USER_REPGROUP
ALL_REPGROUP_PRIVILEGES	DBA_REPGROUP_PRIVILEGES	USER_REPGROUP_PRIVILEGES
ALL_REPGROUPED_COLUMN	DBA_REPGROUPED_COLUMN	USER_REPGROUPED_COLUMN
ALL_REPKEY_COLUMNS	DBA_REPKEY_COLUMNS	USER_REPKEY_COLUMNS
ALL_REPOBJECT	DBA_REPOBJECT	USER_REPOBJECT
ALL_REPPARAMETER_COLUMN	DBA_REPPARAMETER_COLUMN	USER_REPPARAMETER_COLUMN
ALL_REPPRIORITY	DBA_REPPRIORITY	USER_REPPRIORITY
ALL_REPPRIORITY_GROUP	DBA_REPPRIORITY_GROUP	USER_REPPRIORITY_GROUP
ALL_REPPROP	DBA_REPPROP	USER_REPPROP
ALL_REPRESOL_STATS_CONTROL	DBA_REPRESOL_STATS_CONTROL	USER_REPRESOL_STATS_CONTROL
ALL_REPRESOLUTION	DBA_REPRESOLUTION	USER_REPRESOLUTION
ALL_REPRESOLUTION_METHOD	DBA_REPRESOLUTION_METHOD	USER_REPRESOLUTION_METHOD
ALL_REPRESOLUTION_STATISTICS	DBA_REPRESOLUTION_STATISTICS	USER_REPRESOLUTION_STATISTICS
ALL_REPSITES	DBA_REPSITES	USER_REPSITES
N/A	DBA_REPSITES_NEW	N/A

DBA_REGISTERED_MVIEW_GROUPS

DBA_REGISTERED_MVIEW_GROUPS lists all the registered materialized view groups at the master site or master materialized view site.

Column	Data Type	NULL	Description
`NAME`	`VARCHAR2(30)`	-	Name of the materialized view replication group
`MVIEW_SITE`	`VARCHAR2(128)`	-	Site of the materialized view replication group
`GROUP_COMMENT`	`VARCHAR2(80)`	-	Description of the materialized view replication group
`VERSION`	`VARCHAR2(8)`	-	Oracle version of the materialized view replication group Note: Oracle9i Database or later materialized view groups show Oracle8.
`FNAME`	`VARCHAR2(30)`	-	Name of the flavor of the materialized view group
`OWNER`	`VARCHAR2(30)`	-	Owner of the materialized view replication group

ALL_REPCAT_REFRESH_TEMPLATES

Contains global information about each deployment template accessible to the current user, such as the template name, template owner, what refresh group the template objects belong to, and the type of template (private or public).

When the DBA adds materialized view definitions to the template container, the DBA references the appropriate REFRESH_TEMPLATE_NAME. Any materialized views added to a specific template are added to the refresh group specified in REFRESH_GROUP_NAME.

Furthermore, deployment templates created as public are available to all users who can connect to the master site. Deployment templates created as private are limited to those users listed in the ALL_REPCAT_USER_AUTHORIZATIONS view.

Related Views:

DBA_REPCAT_REFRESH_TEMPLATES describes all deployment templates in the database.
USER_REPCAT_REFRESH_TEMPLATES describes all deployment templates owned by the current user.

Column	Data Type	NULL	Description
`REFRESH_TEMPLATE_NAME`	`VARCHAR2(30)`	-	Name of the deployment template.
`OWNER`	`VARCHAR2(30)`	-	Owner of the deployment template.
`REFRESH_GROUP_NAME`	`VARCHAR2(30)`	-	Name of the refresh group to which the template objects are added during the instantiation process.
`TEMPLATE_COMMENT`	`VARCHAR2(2000)`	-	User supplied comment.
`PUBLIC_TEMPLATE`	`VARCHAR2(1)`	-	If Y then the deployment template is public. If N then the deployment template is private.

ALL_REPCAT_TEMPLATE_OBJECTS

Contains the individual object definitions that are contained in each deployment template accessible to the current user. Individual objects are added to a template by specifying the target template in REFRESH_TEMPLATE_NAME.

DDL_TEXT can contain variables to create parameterized templates. Variables are created by placing a colon (:) at the beginning of the variable name (for example, :region). Templates that use parameters allow for greater flexibility during the template instantiation process (that is, in defining data sets specific for a materialized view site).

When the object is added to the template, the specified DDL is examined and if any parameters have been defined, Oracle automatically adds the parameter to the ALL_REPCAT_TEMPLATE_PARMS view.

Related Views:

DBA_REPCAT_TEMPLATE_OBJECTS describes the object definitions for all deployment templates in the database.
USER_REPCAT_TEMPLATE_OBJECTS describes the object definitions for each deployment template owned by the current user.

Column	Data Type	NULL	Description
`REFRESH_TEMPLATE_NAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the deployment template.
`OBJECT_NAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the deployment template object.
`OBJECT_TYPE`	`VARCHAR2(17)`	-	The object type of the deployment template object: FUNCTION MATERIALIZED VIEW INDEX SYNONYM INDEXTYPE TABLE OPERATOR TRIGGER PACKAGE TYPE PACKAGE BODY TYPE BODY PROCEDURE VIEW
`DDL_NUM`	`NUMBER`	`NOT NULL`	Indicates the order in which to execute the DDL statements stored in the `DDL_TEXT` column when multiple DDL statements are used to create the object.
`DDL_TEXT`	`CLOB(4000)`	-	The DDL that is executed to create the deployment template object.
`MASTER_ROLLBACK_SEGMENT`	`VARCHAR2(30)`	-	The name of the rollback segment that is used during the instantiation of the deployment template object.
`DERIVED_FROM_SNAME`	`VARCHAR2(30)`	-	If applicable, displays the schema that contains the object from which the template object was created.
`DERIVED_FROM_ONAME`	`VARCHAR2(30)`	-	If applicable, displays the name of the object from which the template object was created.
`FLAVOR_ID`	`NUMBER`	-	The flavor ID of the deployment template object.

Because the DDL_TEXT column is defined as a CLOB, you receive an error if you simply try to perform a SELECT on the ALL_REPCAT_TEMPLATE_OBJECTS view. If you do not need to see the object DDL, then use the following select statement (be sure to exclude the DDL_TEXT parameter):

SELECT REFRESH_TEMPLATE_NAME, OBJECT_NAME, OBJECT_TYPE, MASTER_ROLLBACK_SEG, 
FLAVOR_ID FROM DBA_REPCAT_TEMPLATE_OBJECTS;

The following script uses cursors and the DBMS_LOB package to view the entire contents of the ALL_REPCAT_TEMPLATE_OBJECTS view. Use this script to view the entire contents of the ALL_REPCAT_TEMPLATE_OBJECTS view, including the DDL_TEXT column:

SET SERVEROUTPUT ON

DECLARE
  CURSOR mycursor IS
        SELECT REFRESH_TEMPLATE_NAME, OBJECT_NAME, OBJECT_TYPE, DDL_TEXT,
          MASTER_ROLLBACK_SEG, FLAVOR_ID
          FROM DBA_REPCAT_TEMPLATE_OBJECTS;
  tempstring VARCHAR2(1000);
  len NUMBER;
BEGIN
  FOR myrec IN mycursor LOOP
        len := DBMS_LOB.GETLENGTH(myrec.ddl_text);
        DBMS_LOB.READ(myrec.ddl_text, len, 1, tempstring);
        DBMS_OUTPUT.PUT_LINE(myrec.refresh_template_name||' '||
          myrec.object_name||' '||myrec.object_type||' '||tempstring||' '||
          myrec.master_rollback_seg||' '||myrec.flavor_id);
  END LOOP;
END;
/

See Also:

Oracle Database Advanced Application Developer's Guide for more information about using cursors. Also, see Oracle Database SecureFiles and Large Objects Developer's Guide for more information about using the DBMS_LOB package and LOBs in general.

ALL_REPCAT_TEMPLATE_PARMS

Contains parameters defined in the object DDL for all templates accessible to the current user. When an object is added to a template, the DDL is examined for variables. Any found parameters are automatically added to this view.

You can also define default parameter values and a prompt string in this view. These can make the templates easier to use during the instantiation process.

See Also:

ALL_REPCAT_TEMPLATE_OBJECTS

Related Views:

DBA_REPCAT_TEMPLATE_PARMS describes the template parameters for all deployment templates in the database.
USER_REPCAT_TEMPLATE_PARMS describes the template parameters for all deployment templates owned by the current user.

Column	Data Type	NULL	Description
`REFRESH_TEMPLATE_NAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the deployment template.
`OWNER`	`VARCHAR2(30)`	`NOT NULL`	The owner of the deployment template.
`REFRESH_GROUP_NAME`	`VARCHAR2(30)`	`NOT NULL`	Name of the refresh group to which the template objects are added to during the instantiation process.
`TEMPLATE_COMMENTS`	`VARCHAR2(2000)`	-	User specified comments.
`PUBLIC_TEMPLATE`	`VARCHAR2(1)`	-	If `Y` then the deployment template is public. If `N` then the deployment template is private.
`PARAMETER_NAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the parameter.
`DEFAULT_PARM_VALUE`	`CLOB(4000)`	-	The default parameter value.
`PROMPT_STRING`	`VARCHAR2(2000)`	-	The prompt string for the parameter.
`USER_OVERRIDE`	`VARCHAR2(1)`	-	If `Y` then the user can override the default parameter value. If `N` then the user cannot override the default parameter value.

Because the DEFAULT_PARM_VALUE column is defined as a CLOB, you receive an error if you simply try to perform a SELECT on the ALL_REPCAT_TEMPLATE_PARMS view. If you do not need to see the default parameter value, then use the following select statement (be sure to exclude DEFAULT_PARM_VALUE):

SELECT REFRESH_TEMPLATE_NAME, OWNER, REFRESH_GROUP_NAME, TEMPLATE_COMMENT,  
  PUBLIC_TEMPLATE, PARAMETER_NAME, PROMPT_STRING, USER_OVERRIDE 
  FROM DBA_REPCAT_TEMPLATE_PARMS;

The following script uses cursors and the DBMS_LOB package to view the entire contents of the ALL_REPCAT_TEMPLATE_PARMS view. Use this script to view the entire contents of the ALL_REPCAT_TEMPLATE_PARMS view, including the DEFAULT_PARM_VALUE column:

SET SERVEROUTPUT ON

DECLARE
  CURSOR mycursor IS
        SELECT REFRESH_TEMPLATE_NAME, OWNER, REFRESH_GROUP_NAME,
          TEMPLATE_COMMENT, PUBLIC_TEMPLATE, PARAMETER_NAME, DEFAULT_PARM_VALUE,
          PROMPT_STRING, USER_OVERRIDE
          FROM DBA_REPCAT_TEMPLATE_PARMS;
  tempstring VARCHAR2(1000);
  len NUMBER;
BEGIN
  FOR myrec IN mycursor LOOP
        len := DBMS_LOB.GETLENGTH(myrec.default_parm_value);
        DBMS_LOB.READ(myrec.default_parm_value, len, 1, tempstring);
        DBMS_OUTPUT.PUT_LINE(myrec.refresh_template_name||' '||
          myrec.owner||' '||myrec.refresh_group_name||' '||
          myrec.template_comment||' '||myrec.public_template||' '||
          myrec.parameter_name||' '||tempstring||' '||myrec.prompt_string||' '||
          myrec.user_override);
  END LOOP;
END;
/

See Also:

ALL_REPCAT_TEMPLATE_SITES

Contains information about the current status of template instantiation among the sites of an enterprise network. This view contains information about instantiation sites for deployment templates that are accessible to the current user. Specifically, the DBA can monitor the installation and deletion of templates at specific sites.

Related Views:

DBA_REPCAT_TEMPLATE_SITES describes all remote instantiation sites for all templates in the database.
USER_REPCAT_TEMPLATE_SITES describes remote instantiation sites for all templates owned by the current user.

Column	Data Type	NULL	Description
`REFRESH_TEMPLATE_NAME`	`VARCHAR2(30)`	`NOT NULL`	Name of the deployment template.
`REFRESH_GROUP_NAME`	`VARCHAR2(30)`	-	Name of the refresh group to which template objects are added during the instantiation process.
`TEMPLATE_OWNER`	`VARCHAR2(30)`	-	Name of the user who is considered the owner of the deployment template.
`USER_NAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the user who instantiated the deployment template.
`SITE_NAME`	`VARCHAR2(128)`	-	Target materialized view site of the deployment template.
`REPAPI_SITE_NAME`	`VARCHAR2(128)`	-	This column is intended for use in a future release of Oracle.
`STATUS`	`VARCHAR2(10)`	-	Displays the status of the deployment template at the target materialized view site: 0 = Not Installed 1 = Installed -1 = Installed with errors
`INSTANTIATION_DATE`	`DATE`	-	Displays when the template was instantiated. Is `NULL` if the template has not yet been instantiated.

ALL_REPCAT_USER_AUTHORIZATIONS

Lists the authorized users for private deployment templates accessible to the current user. Users listed in this view have the ability to instantiate the specified template. Users not listed in this view cannot instantiate the deployment template.

Related Views:

DBA_REPCAT_USER_AUTHORIZATIONS lists the authorized users for all the private deployment templates in the database.
USER_REPCAT_USER_AUTHORIZATION lists the authorized users for private deployment templates owned by the current user.

Column	Data Type	NULL	Description
`REFRESH_TEMPLATE_NAME`	`VARCHAR2(30)`	`NOT NULL`	Name of the deployment template that a user has been authorized to instantiate.
`OWNER`	`VARCHAR2(30)`	`NOT NULL`	Name of the owner of the deployment template.
`REFRESH_GROUP_NAME`	`VARCHAR2(30)`	`NOT NULL`	Name of the refresh group to which template objects are added during the instantiation process.
`TEMPLATE_COMMENT`	`VARCHAR2(2000)`	-	User specified comment.
`PUBLIC_TEMPLATE`	`VARCHAR2(1)`	-	If `Y` then the deployment template is public. If `N` then the deployment template is private.
`USER_NAME`	`VARCHAR2(30)`	`NOT NULL`	Name of the user who has been authorized to instantiate the deployment template.

ALL_REPCAT_USER_PARM_VALUES

This view describes the template parameters for all deployment templates accessible to the current user. The DBA has the option of building a table of user parameters before distributing the template for instantiation. When a template is instantiated by a specified user, the values stored in the ALL_REPCAT_USER_PARM_VALUES view for the specified user are used automatically.

Related Views:

DBA_REPCAT_USER_PARM_VALUES describes the template parameters for all deployment templates in the database.
USER_REPCAT_USER_PARM_VALUES describes the template parameters for all deployment templates owned by the current user.

Column	Data Type	NULL	Description
`REFRESH_TEMPLATE_NAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the deployment template for which a user parameter value has been defined.
`OWNER`	`VARCHAR2(30)`	`NOT NULL`	The name of the owner of the deployment template.
`REFRESH_GROUP_NAME`	`VARCHAR2(30)`	`NOT NULL`	Name of the refresh group to which the template objects are added to during the instantiation process.
`TEMPATE_COMMENT`	`VARCHAR2(2000)`	-	User specified comment.
`PUBLIC_TEMPLATE`	`VARCHAR2(1)`	-	If Y then the deployment template is public. If N then the deployment template is private.
`PARAMETER_NAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the parameter for which a user parameter value has been defined.
`DEFAULT_PARM_VALUE`	`CLOB(4000)`	-	The default value for the parameter.
`PROMPT_STRING`	`VARCHAR2(2000)`	-	The prompt string for the parameter.
`PARM_VALUE`	`CLOB(4000)`	-	The parameter value that has been defined for the specified user.
`USER_NAME`	`VARCHAR2(30)`	`NOT NULL`	The user name of the user for whom the specified parameter value has been defined.

Because DEFAULT_PARM_VALUE and PARM_VALUE columns are defined as CLOB data types, you receive an error if you simply try to perform a SELECT on the ALL_REPCAT_USER_PARM_VALUES view. If you do not need to see the default or user parameter values, then use the following select statement (be sure to exclude DEFAULT_PARM_VALUE and PARM_VALUE):

SELECT REFRESH_TEMPLATE_NAME, OWNER, REFRESH_GROUP_NAME, TEMPLATE_COMMENT, 
  PUBLIC_TEMPLATE, PARAMETER_NAME, PROMPT_STRING, USER_NAME 
  FROM DBA_REPCAT_USER_PARM_VALUES;

The following script uses cursors and the DBMS_LOB package to view the entire contents of the ALL_REPCAT_USER_PARM_VALUES view. Use this script to view the entire contents of the ALL_REPCAT_TEMPLATE_PARMS view, including the DEFAULT_PARM_VALUE and PARM_VALUE columns:

SET SERVEROUTPUT ON

DECLARE
  CURSOR mycursor IS
        SELECT REFRESH_TEMPLATE_NAME, OWNER, REFRESH_GROUP_NAME,
          TEMPLATE_COMMENT, PUBLIC_TEMPLATE, PARAMETER_NAME, DEFAULT_PARM_VALUE,
          PROMPT_STRING, PARM_VALUE, USER_NAME
          FROM DBA_REPCAT_USER_PARM_VALUES;
  tempstring VARCHAR2(1000);
  tempstring2 varchar2(1000);
  len NUMBER;
BEGIN
  FOR myrec IN mycursor LOOP
        len := DBMS_LOB.GETLENGTH(myrec.default_parm_value);
        DBMS_LOB.READ(myrec.default_parm_value, len, 1, tempstring);
        DBMS_OUTPUT.PUT_LINE(myrec.refresh_template_name||' '||
          myrec.owner||' '||myrec.refresh_group_name||' '||
          myrec.template_comment||' '||myrec.public_template||' '||
          myrec.parameter_name||' '||tempstring||' '||myrec.prompt_string||' '||
          tempstring2||' '||myrec.user_name);
  END LOOP;
END;
/

See Also:

ALL_REPCATLOG

Contains the interim status of any asynchronous administrative requests and any error messages generated at each master site. All messages encountered while executing a request are eventually transferred to the ALL_REPCATLOG view at the master site that originated the request. If an administrative request completes without error, then ultimately all traces of this request are removed from the ALL_REPCATLOG view. This view contains administrative requests and error messages that are accessible to the current user.

Related Views:

DBA_REPCATLOG describes the status for all asynchronous administrative requests and all error messages in the database.
USER_REPCATLOG describes the status for all asynchronous administrative requests and all error messages owned by the current user.

Column	Data Type	NULL	Description
`ID`	`NUMBER`	-	A sequence number. Together, the `ID` and `SOURCE` columns identify all log records at all master sites that pertain to a single administrative request.
`SOURCE`	`VARCHAR2(128)`	-	Location where the request originated.
`USERID`	`VARCHAR2(30)`	-	Name of the user making the request.
`TIMESTAMP`	`DATE`	-	When the request was made.
`ROLE`	`VARCHAR2(9)`	-	Indicates if site is the master definition site (masterdef) or a master site (master).
`MASTER`	`VARCHAR2(128)`	-	If the role is 'masterdef' and the task is remote, then indicates which master site is performing the task.
`SNAME`	`VARCHAR2(30)`	-	The name of the schema for the replicated object, if applicable.
`REQUEST`	`VARCHAR2(29)`	-	The name of the `DBMS_REPCAT` administrative procedure that was run.
`ONAME`	`VARCHAR2(30)`	-	The name of the replicated object, if applicable.
`TYPE`	`VARCHAR2(12)`	-	The type of replicated object: FUNCTION MATERIALIZED VIEW INDEX SYNONYM INDEXTYPE TABLE OPERATOR TRIGGER PACKAGE TYPE PACKAGE BODY TYPE BODY PROCEDURE VIEW
`STATUS`	`VARCHAR2(14)`	-	The status of the administrative request: `READY`, `DO_CALLBACK`, `AWAIT_CALLBACK`, or `ERROR`.
`MESSAGE`	`VARCHAR2(200)`	-	Any error message that has been returned.
`ERRNUM`	`NUMBER`	-	The Oracle error number for the message.
`GNAME`	`VARCHAR2(30)`	-	The name of the replication group.

ALL_REPCOLUMN

Lists the replicated columns for the tables accessible to the current user.

If the table contains a column object, then this view displays a placeholder for the type and one row for each type attribute. If the table contains a nested table, then this view displays the storage table for the nested table as an independent table. If a table is an object table, then this view displays the hidden object identifier column.

Related Views:

DBA_REPCOLUMN describes the replicated columns for all the tables in the database.
USER_REPCOLUMN describes the replicated columns for all the tables owned by the current user.

Column	Data Type	NULL	Description
`SNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the object owner.
`ONAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the object.
`TYPE`	`VARCHAR2(8)`	-	The type of the object, either `MATERIALIZED VIEW` or `TABLE`.
`CNAME`	`VARCHAR2(4000)`	-	The name of the replicated column.
`ID`	`NUMBER`	-	The ID number of the replicated column.
`POS`	`NUMBER`	-	The ordering of the replicated column.
`COMPARE_OLD_ON_DELETE`	`VARCHAR2(1)`	-	Indicates whether Oracle compares the old value of the column in replicated deletes.
`COMPARE_OLD_ON_UPDATE`	`VARCHAR2(1)`	-	Indicates whether Oracle compares the old value of the column in replicated updates.
`SEND_OLD_ON_DELETE`	`VARCHAR2(1)`	-	Indicates whether Oracle sends the old value of the column in replicated deletes.
`SEND_OLD_ON_UPDATE`	`VARCHAR2(1)`	-	Indicates whether Oracle sends the old value of the column in replicated updates.
`CTYPE`	`VARCHAR2(30)`	-	Displays the column type. For user-defined types, displays the user-defined type name.
`CTYPE_TOID`	`RAW(16)`	-	If user-defined type, displays the object identifier (OID) of the type. Otherwise, this field is `NULL`.
`CTYPE_OWNER`	`VARCHAR2(30)`	-	If user-defined type, displays the owner of a user-defined type. Otherwise, this field is `NULL`.
`CTYPE_HASHCODE`	`VARCHAR2(34)`	-	If user-defined type, displays the type's hashcode. Otherwise, this field is `NULL`.
`CTYPE_MOD`	`VARCHAR2(3)`	-	Displays `REF` for `REF` columns. Otherwise, this field is `NULL`.
`DATA_LENGTH`	`VARCHAR2(40)`	-	Displays the length of the column in bytes.
`DATA_PRECISION`	`VARCHAR2(40)`	-	Displays the column precision in terms of decimal digits for `NUMBER` columns or binary digits for `FLOAT` columns.
`DATA_SCALE`	`VARCHAR2(40)`	-	Displays the digits to right of decimal point in a number.
`NULLABLE`	`VARCHAR2(1)`	-	Indicates if the column allow `NULL` values.
`CHARACTER_SET_NAME`	`VARCHAR2(44)`	-	If applicable, displays the name of character set for the column.
`TOP`	`VARCHAR2(30)`	-	Displays the top column for an attribute in a column object. For example, in the `oe.customers` table, `cust_address` is a column object and `street_address` is one of its attributes. For the `street_address` attribute, `cust_address` is the `TOP` column. For built-in data types, this field is `NULL`
`CHAR_LENGTH`	`NUMBER`	-	Displays the length of the column in characters. This value only applies to the following data types: `CHAR` `VARCHAR2` `NCHAR` `NVARCHAR2`
`CHAR_USED`	`VARCHAR2(1)`	-	`B` indicates that the column uses `BYTE` length semantics. `C` indicates that the column uses `CHAR` length semantics. `NULL` indicates that the data type is not any of the following: `CHAR` `VARCHAR2` `NCHAR` `NVARCHAR2`

ALL_REPCOLUMN_GROUP

Describes the column groups for each replicated table accessible to the current user.

Related Views:

DBA_REPCOLUMN_GROUP describes the column groups for all the tables in the database.
USER_REPCOLUMN_GROUP describes the column groups for all the tables owned by the current user.

Column	Data Type	NULL	Description
`SNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the schema containing the replicated table.
`ONAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the replicated table.
`GROUP_NAME`	`VARCHAR2(30)`	`NOT NULL`	The column group name.
`GROUP_COMMENT`	`VARCHAR2(80)`	-	Any user-supplied comments.

Note:

The SNAME column is not present in the USER_REPCOLUMN_GROUP view.

ALL_REPCONFLICT

Contains the name of each table accessible to the current user for which a conflict resolution method has been defined and the type of conflict that the method is used to resolve.

Related Views:

DBA_REPCONFLICT describes the conflict resolution method for all the tables in the database on which a conflict resolution method has been defined.
USER_REPCONFLICT describes the conflict resolution method for all the tables owned by the current user on which a conflict resolution method has been defined.

Column	Data Type	NULL	Description
`SNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the schema containing the replicated table.
`ONAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the table for which a conflict resolution method has been defined.
`CONFLICT_TYPE`	`VARCHAR2(10)`	-	The type of conflict that the conflict resolution method is used to resolve: delete, uniqueness, or update.
`REFERENCE_NAME`	`VARCHAR2(30)`	`NOT NULL`	The object to which the method applies. For delete conflicts, this is the table name. For uniqueness conflicts, this is the constraint name. For update conflicts, this is the column group name.

Note:

The SNAME column is not present in the USER_REPCONFLICT view.

ALL_REPDDL

Contains the DDL for each replication object accessible to the current user.

Related Views:

DBA_REPDDL contains the DDL for each replicated object in the database.
USER_REPDDL contains the DDL for each replicated object owned by the current user.

Column	Data Type	NULL	Description
`LOG_ID`	`NUMBER`	-	Identifying number of the `ALL_REPCATLOG` record.
`SOURCE`	`VARCHAR2(128)`	-	Name of the database at which the request originated.
`ROLE`	`VARCHAR2(1)`	-	If `Y` then this database is the master definition site (masterdef) for the request. If `N` then this database is a master site.
`MASTER`	`VARCHAR2(128)`	-	Name of the database that processes this request.
`LINE`	`NUMBER(38)`	-	Ordering of records within a single request.
`TEXT`	`VARCHAR2(2000)`	-	Portion of an argument or DDL text.
`DDL_NUM`	`NUMBER(38)`	-	Indicates the order in which to execute the DDL statements stored in the `TEXT` column when multiple DDL statements are used.

ALL_REPGENOBJECTS

Describes each object accessible to the current user that was generated to support replication.

Related Views:

DBA_REPGENOBJECTS describes each object in the database that was generated to support replication.
USER_REPGENOBJECTS describes each object owned by the current user that was generated to support replication.

Column	Data Type	NULL	Description
`SNAME`	`VARCHAR2(30)`	-	The name of the replicated schema.
`ONAME`	`VARCHAR2(30)`	-	The name of the generated object.
`TYPE`	`VARCHAR2(12)`	-	The type of the generated object, either `PACKAGE`, `PACKAGE` `BODY`, `TRIGGER`, or `INTERNAL PACKAGE`.
`BASE_SNAME`	`VARCHAR2(30)`	-	The base object's owner.
`BASE_ONAME`	`VARCHAR2(30)`	-	The object for which this object was generated.
`BASE_TYPE`	`VARCHAR2(12)`	-	The type of the base object.
`PACKAGE_PREFIX`	`VARCHAR2(30)`	-	The prefix for the package wrapper.
`PROCEDURE_PREFIX`	`VARCHAR2(30)`	-	The procedure prefix for the package wrapper.
`DISTRIBUTED`	`VARCHAR2(1)`	-	This column is obsolete.
`REASON`	`VARCHAR2(30)`	-	The reason the object was generated.

ALL_REPGROUP

Describes all of the replication groups that are accessible to the current user. The members of each replication group are listed in a different view: ALL_REPOBJECT.

Related Views:

DBA_REPGROUP describes all of the replication groups in the database that are being replicated.
USER_REPGROUP describes all of the replication groups owned by the current user that are being replicated.

Column	Data Type	NULL	Description
`SNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the replicated schema. This column is obsolete.
`MASTER`	`VARCHAR2(1)`	-	`Y` indicates that the current site is a master site. `N` indicates the current site is a materialized view site.
`STATUS`	`VARCHAR2(9)`	-	Used at master sites only. Status can be: normal, quiescing, or quiesced.
`SCHEMA_COMMENT`	`VARCHAR2(80)`	-	Any user-supplied comments.
`GNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the replication group.
`FNAME`	`VARCHAR2(30)`	-	Flavor name.
`RPC_PROCESSING_DISABLED`	`VARCHAR2(1)`	-	`N` indicates that this site can receive and apply deferred remote procedure calls (RPCs). `Y` indicates that this site cannot receive and apply deferred remote procedure calls (RPCs).
`OWNER`	`VARCHAR2(30)`	`NOT NULL`	Owner of the replication group.

ALL_REPGROUP_PRIVILEGES

Contains information about the users who are registered for privileges in replication groups. Shows only those replication groups accessible to the current user.

Related Views:

DBA_REPGROUP_PRIVILEGES contains information about the users who are registered for privileges in all the replication groups in the database.
USER_REPGROUP_PRIVILEGES contains information about the users who are registered for privileges in the replication groups owned by the current user.

Column	Data Type	NULL	Description
`USERNAME`	`VARCHAR2(30)`	`NOT NULL`	Displays the name of the user.
`GNAME`	`VARCHAR2(30)`	-	Displays the name of the replication group.
`CREATED`	`DATE`	`NOT NULL`	Displays the date that the replication group was registered.
`RECEIVER`	`VARCHAR2(1)`	-	Indicates whether the user has receiver privileges.
`PROXY_SNAPADMIN`	`VARCHAR2(1)`	-	Indicates whether the user has `proxy_snapadmin` privileges.
`OWNER`	`VARCHAR2(30)`	-	Owner of the replication group.

ALL_REPGROUPED_COLUMN

Describes all of the columns that comprise the column groups for each table accessible to the current user.

Related Views:

DBA_REPGROUPED_COLUMN describes all of the columns that comprise the column groups for each table in the database.
USER_REPGROUPED_COLUMN describes all of the columns that comprise the column groups for each table owned by the current user.

Column	Data Type	NULL	Description
`SNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the schema containing the replicated table.
`ONAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the replicated table.
`GROUP_NAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the column group.
`COLUMN_NAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the column in the column group.

Note:

The SNAME column is not present in the USER_REPGROUPED_COLUMN version of the view.

ALL_REPKEY_COLUMNS

Describes the replication key column(s) accessible to the current user in each table.

The replication key column(s) is an alternate column or group of columns, instead of the primary key, used to determine which columns of a table to compare when using row-level replication. You can set the replication key columns using the SET_COLUMNS procedure in the DBMS_REPCAT package.

The following types of columns cannot be replication key columns:

LOB or LOB attribute of a column object
Collection or collection attribute of a column object
REF
An entire column object

See Also:

"SET_COLUMNS Procedure"

Related Views:

DBA_REPKEY_COLUMNS describes the replication key column(s) in each table in the database.
USER_REPKEY_COLUMNS describes the replication key column(s) in each table owned by the current user.

Column	Data Type	NULL	Description
`SNAME`	`VARCHAR2(30)`	`NOT NULL`	Owner of the replicated table.
`ONAME`	`VARCHAR2(30)`	`NOT NULL`	Name of the replicated table.
`COL`	`VARCHAR2(4000)`	-	Replication key column(s) in the table.

ALL_REPOBJECT

Contains information about the objects in each replication group accessible to the current user. An object can belong to only one replication group. A replication group can span multiple schemas.

Related Views:

DBA_REPOBJECT contains information about the objects in each replication group in the database.
USER_REPOBJECT contains information about the objects owned by the current user in each replication group.

Column	Data Type	NULL	Description
`SNAME`	`VARCHAR2(30)`	-	The name of the schema containing the replicated object.
`ONAME`	`VARCHAR2(30)`	-	The name of the replicated object.
`TYPE`	`VARCHAR2(16)`	-	The type of replicated object: FUNCTION MATERIALIZED VIEW INDEX SYNONYM INDEXTYPE TABLE OPERATOR TRIGGER PACKAGE TYPE PACKAGE BODY TYPE BODY PROCEDURE VIEW
`STATUS`	`VARCHAR2(10)`	-	`CREATE` indicates that Oracle is applying user supplied or Oracle-generated DDL to the local database in an attempt to create the object locally. When a local replica exists, Oracle `COMPAREs` the replica with the master definition to ensure that they are consistent. When creation or comparison complete successfully, Oracle updates the status to `VALID`. Otherwise, it updates the status to `ERROR`. If you drop an object, then Oracle updates its status to `DROPPED` before deleting the row from the `ALL_REPOBJECT` view.
`GENERATION_STATUS`	`VARCHAR2(9)`	-	Specifies whether the object must generate replication packages.
`ID`	`NUMBER`	-	The identifier of the local database object, if one exists.
`OBJECT_COMMENT`	`VARCHAR2(80)`	-	Any user supplied comments.
`GNAME`	`VARCHAR2(30)`	-	The name of the replication group to which the object belongs.
`MIN_COMMUNICATION`	`VARCHAR2(1)`	-	If `Y` then use minimum communication for an update. If `N` then send all old and all new values for an update.
`REPLICATION_TRIGGER_EXISTS`	`VARCHAR2(1)`	-	If `Y` then internal replication trigger exists. If `N` then internal replication trigger does not exist.
`INTERNAL_PACKAGE_EXISTS`	`VARCHAR2(1)`	-	If `Y` then internal package exists. If `N` then internal package does not exist.
`GROUP_OWNER`	`VARCHAR2(30)`	-	Owner of the replication group.
`NESTED_TABLE`	`VARCHAR2(1)`	-	If `Y` then the replicated object is the storage table of a nested table. If `N` then the replicated object is not a storage table.

ALL_REPPARAMETER_COLUMN

In addition to the information contained in the ALL_REPRESOLUTION view, the ALL_REPPARAMETER_COLUMN view contains information about the columns that are used to resolve conflicts for each replicated table accessible to the current user. These are the column values that are passed as the list_of_column_names argument to the ADD_conflicttype_RESOLUTION procedures in the DBMS_REPCAT package.

Related Views:

DBA_REPPARAMETER_COLUMN contains information about the columns that are used to resolve conflicts for each replicated table in the database.
USER_REPPARAMETER_COLUMN contains information about the columns that are used to resolve conflicts for each replicated table owned by the current user.

Column	Data Type	NULL	Description
`SNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the schema containing the replicated table.
`ONAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the replicated table.
`CONFLICT_TYPE`	`VARCHAR2(10)`	-	The type of conflict that the method is used to resolve: delete, uniqueness, or update.
`REFERENCE_NAME`	`VARCHAR2(30)`	`NOT NULL`	The object to which the method applies. For delete conflicts, this is the table name. For uniqueness conflicts, this is the constraint name. For update conflicts, this is the column group name.
`SEQUENCE_NO`	`NUMBER`	`NOT NULL`	The order in which resolution methods are applied, with 1 applied first.
`METHOD_NAME`	`VARCHAR2(80)`	`NOT NULL`	The name of an Oracle-supplied conflict resolution method. For user-supplied methods, this value is 'user function'.
`FUNCTION_NAME`	`VARCHAR2(92)`	`NOT NULL`	For methods of type 'user function', the name of the user-supplied conflict resolution method.
`PRIORITY_GROUP`	`VARCHAR2(30)`	-	For methods of name 'priority group', the name of the priority group.
`PARAMETER_TABLE_NAME`	`VARCHAR2(30)`	`NOT NULL`	Displays the name of the table to which the parameter column belongs.
`PARAMETER_COLUMN_NAME`	`VARCHAR2(4000)`	-	The name of the column used as the `IN` parameter for the conflict resolution method.
`PARAMETER_SEQUENCE_NO`	`NUMBER`	`NOT NULL`	Ordering of column used as `IN` parameter.

Note:

The SNAME column is not present in the USER_REPPARAMETER_COLUMN view.

ALL_REPPRIORITY

Contains the value and priority level of each priority group member in each priority group accessible to the current user. Priority group names must be unique within a replication group. Priority levels and values must each be unique within a given priority group.

Related Views:

DBA_REPPRIORITY contains the value and priority level of each priority group member in each priority group in the database.
USER_REPPRIORITY contains the value and priority level of each priority group member in each priority group owned by the current user.

Column	Data Type	NULL	Description
`SNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the replicated schema. This column is obsolete.
`PRIORITY_GROUP`	`VARCHAR2(30)`	`NOT NULL`	The name of the priority group or site priority group.
`PRIORITY`	`NUMBER`	`NOT NULL`	The priority level of the member. The highest number has the highest priority.
`DATA_TYPE`	`VARCHAR2(9)`	-	The data type of the values in the priority group.
`FIXED_DATA_LENGTH`	`NUMBER(38)`	-	The maximum length of values of data type `CHAR`.
`CHAR_VALUE`	`CHAR(255)`	-	The value of the priority group member, if `DATA_TYPE` is `CHAR`.
`VARCHAR2_VALUE`	`VARCHAR2(4000)`	-	The value of the priority group member, if `DATA_TYPE` is `VARCHAR2`.
`NUMBER_VALUE`	`NUMBER`	-	The value of the priority group member, if `DATA_TYPE` is `NUMBER`.
`DATE_VALUE`	`DATE`	-	The value of the priority group member, if `DATA_TYPE` is `DATE`.
`RAW_VALUE`	`RAW(2000)`	-	The value of the priority group member, if `DATA_TYPE` is `RAW`.
`GNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the replication group.
`NCHAR_VALUE`	`NCHAR(500)`	-	The value of the priority group member, if `DATA_TYPE` is `NCHAR`.
`NVARCHAR2_VALUE`	`VARCHAR2(1000)`	-	The value of the priority group member, if `DATA_TYPE` is `NVARCHAR2`.
`LARGE_CHAR_VALUE`	`CHAR(2000)`	-	The value of the priority group member, for blank-padded character strings over 255 characters.

Note:

The SNAME and GNAME columns are not present in the USER_REPPRIORITY view.

ALL_REPPRIORITY_GROUP

Describes the priority group or site priority group defined for each replication group accessible to the current user.

Related Views:

DBA_REPPRIORITY_GROUP describes the priority group or site priority group defined for each replication group in the database.
USER_REPPRIORITY_GROUP describes the priority group or site priority group defined for each replication group owned by the current user.

Column	Data Type	NULL	Description
`SNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the replicated schema. This column is obsolete.
`PRIORITY_GROUP`	`VARCHAR2(30)`	`NOT NULL`	The name of the priority group or site priority group.
`DATA_TYPE`	`VARCHAR2(9)`	-	The data type of each value in the priority group.
`FIXED_DATA_LENGTH`	`NUMBER(38)`	-	The maximum length for values of data type `CHAR`.
`PRIORITY_COMMENT`	`VARCHAR2(80)`	-	Any user-supplied comments.
`GNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the replication group.

Note:

The SNAME and GNAME columns are not present in the USER_REPPRIORITY view.

ALL_REPPROP

Indicates the technique used to propagate operations on each replicated object to the same object at another master site. These operations might have resulted from a call to a stored procedure or procedure wrapper, or might have been issued against a table directly. This view shows objects accessible to the current user.

Related Views:

DBA_REPPROP indicates the technique used to propagate operations on each replicated object to the same object at another master site. This view shows all objects in the database.
USER_REPPROP indicates the technique used to propagate operations on each replicated object to the same object at another master site. This view shows objects owned by the current user

Column	Data Type	NULL	Description
`SNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the schema containing the replicated object.
`ONAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the replicated object.
`TYPE`	`VARCHAR2(16)`	-	The type of object being replicated: FUNCTION PROCEDURE INDEXTYPE MATERIALIZED VIEW OPERATOR TABLE PACKAGE TYPE PACKAGE BODY TYPE BODY
`DBLINK`	`VARCHAR2(128)`	`NOT NULL`	The fully qualified database name of the master site to which changes are being propagated.
`HOW`	`VARCHAR2(13)`	-	How propagation is performed. Values recognized are 'none' for the local master site, and 'synchronous' or 'asynchronous' for all others.
`PROPAGATE_COMMENT`	`VARCHAR2(80)`	-	Any user-supplied comments.

ALL_REPRESOL_STATS_CONTROL

Describes statistics collection for conflict resolutions for all replicated tables accessible to the current user.

Related Views:

DBA_REPRESOL_STATS_CONTROL describes statistics collection for conflict resolutions for all replicated tables in the database.
USER_REPRESOL_STATS_CONTROL describes statistics collection for conflict resolutions for all replicated tables owned by the current user.

Column	Data Type	NULL	Description
`SNAME`	`VARCHAR2(30)`	`NOT NULL`	Owner of the table.
`ONAME`	`VARCHAR2(30)`	`NOT NULL`	Table name.
`CREATED`	`DATE`	`NOT NULL`	Timestamp for when statistics collection was first started.
`STATUS`	`VARCHAR2(9)`	-	Status of statistics collection: `ACTIVE` or `CANCELLED`.
`STATUS_UPDATE_DATE`	`DATE`	`NOT NULL`	Timestamp for when the status was last updated.
`PURGED_DATE`	`DATE`	-	Timestamp for the last purge of statistics data.
`LAST_PURGE_START_DATE`	`DATE`	-	The last start date of the statistics purging date range.
`LAST_PURGE_END_DATE`	`DATE`	-	The last end date of the statistics purging date range.

Note:

The SNAME column is not present in the USER_REPRESOL_STATS_CONTROL view.

ALL_REPRESOLUTION

Indicates the methods used to resolve update, uniqueness, or delete conflicts for each table accessible to the current user that is replicated using row-level replication for a given schema.

Related Views:

DBA_REPRESOLUTION indicates the methods used to resolve update, uniqueness, or delete conflicts for each table in the database that is replicated using row-level replication for a given schema.
USER_REPRESOLUTION indicates the methods used to resolve update, uniqueness, or delete conflicts for each table owned by the current user that is replicated using row-level replication.

Column	Data Type	NULL	Description
`SNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the replicated schema.
`ONAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the replicated table.
`CONFLICT_TYPE`	`VARCHAR2(10)`	-	The type of conflict that the method is used to resolve: delete, uniqueness, or update.
`REFERENCE_NAME`	`VARCHAR2(30)`	`NOT NULL`	The object to which the method applies. For delete conflicts, this is the table name. For uniqueness conflicts, this is the constraint name. For update conflicts, this is the column group name.
`SEQUENCE_NO`	`NUMBER`	`NOT NULL`	The order that resolution methods are applied, with 1 applied first.
`METHOD_NAME`	`VARCHAR2(80)`	`NOT NULL`	The name of an Oracle-supplied conflict resolution method. For user-supplied methods, this value is 'user function'.
`FUNCTION_NAME`	`VARCHAR2(92)`	`NOT NULL`	For methods of type 'user function', the name of the user-supplied conflict resolution method.
`PRIORITY_GROUP`	`VARCHAR2(30)`	-	For methods of type 'priority group', the name of the priority group.
`RESOLUTION_COMMENT`	`VARCHAR2(80)`	-	Any user-supplied comments.

Note:

The SNAME column is not present in the USER_REPRESOLUTION view.

ALL_REPRESOLUTION_METHOD

Lists all of the conflict resolution methods available in the database. Initially, this view lists the standard methods provided with Advanced Replication. As you create new user functions and add them as conflict resolution methods for an object in the database, these functions are added to this view.

Related Views:

DBA_REPRESOLUTION_METHOD lists all of the conflict resolution methods available in the database.
USER_REPRESOLUTION_METHOD lists all of the conflict resolution methods available in the database.

Column	Data Type	NULL	Description
`CONFLICT_TYPE`	`VARCHAR2(10)`	-	The type of conflict that the resolution method is designed to resolve: update, uniqueness, or delete.
`METHOD_NAME`	`VARCHAR2(80)`	`NOT NULL`	The name of the Oracle-supplied method, or the name of the user-supplied method.

ALL_REPRESOLUTION_STATISTICS

Lists information about successfully resolved update, uniqueness, and delete conflicts for all replicated tables accessible to the current user. These statistics are gathered for a table only if you have called the DBMS_REPCAT.REGISTER_STATISTICS procedure.

Related Views:

DBA_REPRESOLUTION_STATISTICS lists information about successfully resolved update, uniqueness, and delete conflicts for all replicated tables in the database.
USER_REPRESOLUTION_STATISTICS lists information about successfully resolved update, uniqueness, and delete conflicts for all replicated tables owned by the current user.

Column	Data Type	NULL	Description
`SNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the replicated schema.
`ONAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the replicated table.
`CONFLICT_TYPE`	`VARCHAR2(10)`	-	The type of conflict that was successfully resolved: delete, uniqueness, or update.
`REFERENCE_NAME`	`VARCHAR2(30)`	`NOT NULL`	The object to which the conflict resolution method applies. For delete conflicts, this is the table name. For uniqueness conflicts, this is the constraint name. For update conflicts, this is the column group name.
`METHOD_NAME`	`VARCHAR2(80)`	`NOT NULL`	The name of an Oracle-supplied conflict resolution method. For user-supplied methods, this value is 'user function'.
`FUNCTION_NAME`	`VARCHAR2(92)`	-	For methods of type 'user function', the name of the user supplied conflict resolution method.
`PRIORITY_GROUP`	`VARCHAR2(30)`	-	For methods of type 'priority group', the name of the priority group.
`RESOLVED_DATE`	`DATE`	`NOT NULL`	Date on which the conflict for this row was resolved.
`PRIMARY_KEY_VALUE`	`VARCHAR2(2000)`	`NOT NULL`	A concatenated representation of the row's primary key.

Note:

The SNAME column is not present in the USER_REPRESOLUTION_STATISTICS view.

ALL_REPSITES

Lists the members of each replication group accessible to the current user.

Related Views:

DBA_REPSITES lists the members of each replication group in the database.
USER_REPSITES lists the members of each replication group owned by the current user.

Column	Data Type	NULL	Description
`GNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the replication group.
`DBLINK`	`VARCHAR2(128)`	`NOT NULL`	The database link to a master site for this replication group.
`MASTERDEF`	`VARCHAR2(1)`	-	Indicates which of the `DBLINKs` is the master definition site.
`SNAPMASTER`	`VARCHAR2(1)`	-	Used by materialized view sites to indicate which of the `DBLINKs` to use when refreshing.
`MASTER_COMMENT`	`VARCHAR2(80)`	-	User-supplied comments.
`MASTER`	`VARCHAR2(1)`	-	If `Y` then the site is a master site for the replicated group. If `N` then the site is not a master site for the replicated group.
`GROUP_OWNER`	`VARCHAR2(30)`	`NOT NULL`	Owner of the replication group.

The DBA_REPSITES view has the following additional columns:

Column	Data Type	NULL	Description
`PROP_UPDATES`	`NUMBER`	-	Encoding of propagating technique for master site.
`MY_DBLINK`	`VARCHAR2(1)`	-	Used to detect problems after import. If Y then the `DBLINK` is the global name.

DBA_REPCAT_REFRESH_TEMPLATES

This view contains global information about each deployment template in the database, such as the template name, template owner, what refresh group the template objects belong to, and the type of template (private or public).

Its columns are the same as those in ALL_REPCAT_REFRESH_TEMPLATES. For detailed information about this view and its columns, see ALL_REPCAT_REFRESH_TEMPLATES.

DBA_REPCAT_TEMPLATE_OBJECTS

The DBA_REPCAT_TEMPLATE_OBJECTS view contains the individual object definitions that are contained in all deployment templates in the database. Individual objects are added to a template by specifying the target template in REFRESH_TEMPLATE_NAME.

Its columns are the same as those in ALL_REPCAT_TEMPLATE_OBJECTS. For detailed information about this view and its columns, see ALL_REPCAT_TEMPLATE_OBJECTS.

DBA_REPCAT_TEMPLATE_PARMS

Parameters defined in the object DDL for all templates in the database are stored in the DBA_REPCAT_TEMPLATE_PARMS table. When an object is added to a template, the DDL is examined for variables. Any found parameters are automatically added to this view.

Its columns are the same as those in ALL_REPCAT_TEMPLATE_PARMS. For detailed information about this view and its columns, see ALL_REPCAT_TEMPLATE_PARMS.

DBA_REPCAT_TEMPLATE_SITES

The DBA_REPCAT_TEMPLATE_SITES view provides the DBA with information about the current status of template instantiation for all the sites of a enterprise network. This view contains information about instantiation sites for all deployment templates in the database. Specifically, the DBA can monitor the installation and deletion of templates at specific sites. Its columns are the same as those in ALL_REPCAT_TEMPLATE_SITES.

DBA_REPCAT_USER_AUTHORIZATIONS

The DBA_REPCAT_USER_AUTHORIZATIONS view lists the authorized users for all templates in the database specified for private use. Users listed in this view have the ability to instantiate the specified template. Users not contained in this view cannot instantiate the template. Its columns are the same as those in ALL_REPCAT_USER_AUTHORIZATIONS.

DBA_REPCAT_USER_PARM_VALUES

The DBA_REPCAT_USER_PARM_VALUES view describes the template parameters for all deployment templates in the database. The DBA has the option of building a table of user parameters before distributing the template for instantiation. When a template is instantiated by a specified user, the values stored in the DBA_REPCAT_USER_PARM_VALUES table for the specified user are used automatically.

Its columns are the same as those in ALL_REPCAT_USER_PARM_VALUES. For detailed information about this view and its columns, see ALL_REPCAT_USER_PARM_VALUES.

DBA_REPCATLOG

The DBA_REPCATLOG view at each master site contains the interim status of any asynchronous administrative requests and any error messages generated. All messages encountered while executing a request are eventually transferred to the DBA_REPCATLOG view at the master site that originated the request. If an administrative request completes without error, then ultimately all traces of this request are removed from the DBA_REPCATLOG view. Its columns are the same as those in ALL_REPCATLOG.

DBA_REPCOLUMN

The DBA_REPCOLUMN view lists the replicated columns for all the tables in the database. Its columns are the same as those in ALL_REPCOLUMN.

DBA_REPCOLUMN_GROUP

The DBA_REPCOLUMN_GROUP view lists all the column groups each replicated table in the database. Its columns are the same as those in ALL_REPCOLUMN_GROUP.

DBA_REPCONFLICT

The DBA_REPCONFLICT view displays the name of each table in the database on which a conflict resolution method has been defined and the type of conflict that the method is used to resolve. Its columns are the same as those in ALL_REPCONFLICT.

DBA_REPDDL

The DBA_REPDDL contains the DDL for each replication object in the database. Its columns are the same as those in ALL_REPDDL.

DBA_REPEXTENSIONS

The DBA_REPEXTENSIONS view contains information about current operations that are adding new master sites to a master group without quiescing the master group.

See Also:

"Adding New Master Sites without Quiescing the Master Group" for information about the procedure that adds new master sites to a replication environment

Column	Data Type	NULL	Description
`EXTENSION_ID`	`RAW(16)`	`NOT NULL`	The identifier for a current pending request to add master databases to a master group without quiesce.
`REQUEST`	`VARCHAR2(15)`	-	Extension request type. Currently, the only possible value is `ADD_NEW_MASTERS`, which indicates a request to add new master sites to a master group without quiescing.
`MASTERDEF`	`VARCHAR2(128)`	-	The global name of the master definition site of the master groups to which new master sites are being added.
`EXPORT_REQUIRED`	`VARCHAR2(3)`	-	`YES` indicates that one or more new master sites will be added using export/import of either the entire database or at the table level. `NO` indicates that all new master sites will be added using change-based recovery.
`REPCATLOG_ID`	`NUMBER`	-	Identifier of replication catalog records related to a replication extension, on which the master definition site is waiting. This value is only meaningful at the master definition site.
`EXTENSION_STATUS`	`VARCHAR2(13)`	-	Status of each replication extension. This value is only meaningful at the master definition site. The possible values are: `READY`: The extension request has been created and is ready. `STOPPING`: The new master sites have been added to the master group and the master definition site is attempting to stop propagation from existing masters to new master sites and to the master definition site. `EXPORTING`: The propagation of deferred transactions has been stopped from existing master sites to new master sites and to the master definition site. The master definition site is waiting for the export to finish. `INSTANTIATING`: The `DBMS_REPCAT.RESUME_PROPAGATION_TO_MDEF` procedure has been invoked (if export was used), and the master definition site is waiting for the new masters to instantiate. `ERROR`: An error occurred during the execution of this extension request.
`FLASHBACK_SCN`	`NUMBER`	-	The system change number (SCN) that must be used during export or change-based recovery when the new master sites are added. The new master sites must be consistent with the SCN listed.
`BREAK_TRANS_TO_MASTERDEF`	`VARCHAR2(3)`	-	This value is meaningful only if `EXPORT_REQUIRED` is `TRUE`. If `BREAK_TRANS_TO_MASTERDEF` is `TRUE`, then existing masters can continue to propagate their deferred transactions to the master definition site for replication groups that are not adding master sites. Deferred transactions for replication groups that are adding master sites cannot be propagated until the export completes. If `BREAK_TRANS_TO_MASTERDEF` is `FALSE`, then existing masters cannot propagate any deferred transactions to the master definition site.
`BREAK_TRANS_TO_NEW_MASTERS`	`VARCHAR2(3)`	-	If `BREAK_TRANS_TO_NEW_MASTERS` is `TRUE`, then existing master sites can continue to propagate deferred transactions to the new master sites for replication groups that are not adding master sites. If `BREAK_TRANS_TO_NEW_MASTERS` is `FALSE`, then propagation of deferred transaction queues to the new masters is disabled.
`PERCENTAGE_FOR_CATCHUP_MDEF`	`NUMBER`	-	This value is meaningful only if `BREAK_TRANS_TO_MASTERDEF` is `TRUE`. The percentage of propagation resources to use for catching up propagation to the master definition site.
`CYCLE_SECONDS_MDEF`	`NUMBER`	-	This value is meaningful when `PERCENTAGE_FOR_CATCHUP_MDEF` is both meaningful and is a value between 10 and 90, inclusive. In this case, propagation to the master definition site alternates between replication groups that are not being extended and replication groups that are being extended, with one push to each during each cycle. This value indicates the length of the cycle in seconds.
`PERCENTAGE_FOR_CATCHUP_NEW`	`NUMBER`	-	This value is meaningful only if `BREAK_TRANS_TO_NEW_MASTERS` is `TRUE`. The percentage of propagation resources to use for catching up propagation to new master sites.
`CYCLE_SECONDS_NEW`	`NUMBER`	-	This value is meaningful when `PERCENTAGE_FOR_CATCHUP_NEW` is both meaningful and is a value between 10 and 90, inclusive. In this case, propagation to a new master alternates between replication groups that are not being extended and replication groups that are being extended, with one push to each during each cycle. This value indicates the length of the cycle in seconds.

DBA_REPGENOBJECTS

The DBA_REPGENOBJECTS view describes each object in the database that was generated to support replication. Its columns are the same as those in ALL_REPGENOBJECTS.

DBA_REPGROUP

The DBA_REPGROUP view describes all of the replication groups in the database. The members of each replication group are listed in a different view, DBA_REPOBJECT. The DBA_REPGROUP view's columns are the same as those in ALL_REPGROUP.

DBA_REPGROUP_PRIVILEGES

The DBA_REPGROUP_PRIVILEGES view contains information about the users who are registered for privileges in replication groups. Shows all replication groups in the database. Its columns are the same as those in ALL_REPGROUP_PRIVILEGES.

DBA_REPGROUPED_COLUMN

The DBA_REPGROUPED_COLUMN view lists all of the columns that comprise the column groups for each table in the database. Its columns are the same as those in ALL_REPGROUPED_COLUMN.

DBA_REPKEY_COLUMNS

The DBA_REPKEY_COLUMNS view describes the replication key column(s) in each table in the database. Its columns are the same as those in ALL_REPKEY_COLUMNS.

DBA_REPOBJECT

The DBA_REPOBJECT view contains information about the objects in each replication group in the database. An object can belong to only one replication group. A replication group can span multiple schemas. Its columns are the same as those in ALL_REPOBJECT.

DBA_REPPARAMETER_COLUMN

In addition to the information contained in the DBA_REPRESOLUTION view, the DBA_REPPARAMETER_COLUMN view contains information about the columns that are used to resolve conflicts for each replicated table in the database. These are the column values that are passed as the list_of_column_names argument to the ADD_conflicttype_RESOLUTION procedures in the DBMS_REPCAT package. Its columns are the same as those in ALL_REPPARAMETER_COLUMN.

DBA_REPPRIORITY

The DBA_REPPRIORITY view contains the value and priority level of each priority group member in each priority group in the database. Priority group names must be unique within a replication group. Priority levels and values must each be unique within a given priority group. Its columns are the same as those in ALL_REPPRIORITY.

DBA_REPPRIORITY_GROUP

The DBA_REPPRIORITY_GROUP view describes the priority group or site priority group defined for each replication group in the database. Its columns are the same as those in ALL_REPPRIORITY_GROUP.

DBA_REPPROP

The DBA_REPPROP view indicates the technique used to propagate operations on each replicated object to the same object at another master site. These operations might have resulted from a call to a stored procedure or procedure wrapper, or might have been issued against a table directly. This view shows all objects in the database. Its columns are the same as those in ALL_REPPROP.

DBA_REPRESOL_STATS_CONTROL

The DBA_REPRESOL_STATS_CONTROL view describes statistics collection for conflict resolutions for all replicated tables in the database. Its columns are the same as those in ALL_REPRESOL_STATS_CONTROL.

DBA_REPRESOLUTION

The DBA_REPRESOLUTION view indicates the methods used to resolve update, uniqueness, or delete conflicts for each table in the database that is replicated using row-level replication for a given schema. Its columns are the same as those in ALL_REPRESOLUTION.

DBA_REPRESOLUTION_METHOD

The DBA_REPRESOLUTION_METHOD view lists all of the conflict resolution methods available in the database. Initially, this view lists the standard methods provided with the advanced replication facility. As you create new user functions and add them as conflict resolution methods for an object in the database, these functions are added to this view. Its columns are the same as those in ALL_REPRESOLUTION_METHOD.

DBA_REPRESOLUTION_STATISTICS

The DBA_REPRESOLUTION_STATISTICS view lists information about successfully resolved update, uniqueness, and delete conflicts for all replicated tables in the database. These statistics are only gathered for a table if you have called the DBMS_REPCAT.REGISTER_STATISTICS procedure. The DBA_REPRESOLUTION_STATISTICS view's columns are the same as those in ALL_REPRESOLUTION_STATISTICS.

DBA_REPSITES

The DBA_REPSITES view lists the members of each replication group in the database.

This view has the following additional columns that are not included in the ALL_REPSITES and USER_REPSITES views:

Column	Data Type	NULL	Description
`PROP_UPDATES`	`NUMBER`	-	Encoding of propagating technique for master site.
`MY_DBLINK`	`VARCHAR2(1)`	-	Used to detect problem after import. If Y then the dblink is the global name.

Except for these additional columns, its columns are the same as those in ALL_REPSITES.

DBA_REPSITES_NEW

The DBA_REPSITES_NEW view lists the new replication sites that you plan to add to your replication environment.

See Also:

"Adding New Master Sites without Quiescing the Master Group" for information about the procedure that adds new master sites to a replication environment

Column	Data Type	NULL	Description
`EXTENSION_ID`	`RAW(16)`	`NOT NULL`	The identifier for a current pending request to add master databases to a master group without quiesce.
`GOWNER`	`VARCHAR2(30)`	`NOT NULL`	The name of the user who owns the master group.
`GNAME`	`VARCHAR2(30)`	`NOT NULL`	The name of the master group.
`DBLINK`	`VARCHAR2(128)`	`NOT NULL`	The database link for a new master site.
`FULL_INSTANTIATION`	`VARCHAR2(1)`	-	`Y` indicates that the new database in `DBLINK` is to be added using full database export/import or change-based recovery. `N` indicates that the new database in `DBLINK` is to be added using object-level export/import.
`MASTER_STATUS`	`VARCHAR2(13)`	-	The instantiation status of a new master site. This value is only meaningful at the master definition site. The possible values are: `READY`: The new master site is ready. `INSTANTIATING`: The new master site is in the process of being instantiated. `INSTANTIATED`: The new master has been instantiated and is being prepared for replication activity. That is, the `DBMS_REPCAT.PREPARE_INSTANTIATED_MASTER` procedure has been run. `PREPARED`: The propagation of deferred transactions is enabled from the new master site to other prepared masters, to existing masters, and to the master definition site. The new master is now prepared to participate in the replication environment.

USER_REPCAT_REFRESH_TEMPLATES

This view contains global information about each deployment template owned by the current user, such as the template name, template owner, what refresh group the template objects belong to, and the type of template (private or public).

Its columns are the same as those in ALL_REPCAT_REFRESH_TEMPLATES. For detailed information about this view and its columns, see ALL_REPCAT_REFRESH_TEMPLATES.

USER_REPCAT_TEMPLATE_OBJECTS

The USER_REPCAT_TEMPLATE_OBJECTS view contains the individual object definitions that are contained in each deployment template owned by the current user. Individual objects are added to a template by specifying the target template in REFRESH_TEMPLATE_NAME.

Its columns are the same as those in ALL_REPCAT_TEMPLATE_OBJECTS. For detailed information about this view and its columns, see ALL_REPCAT_TEMPLATE_OBJECTS.

USER_REPCAT_TEMPLATE_PARMS

Parameters defined in the object DDL for all templates owned by the current user are stored in the USER_REPCAT_TEMPLATE_PARMS table. When an object is added to a template, the DDL is examined for variables; any found parameters are automatically added to this view.

Its columns are the same as those in ALL_REPCAT_TEMPLATE_PARMS. For detailed information about this view and its columns, see ALL_REPCAT_TEMPLATE_PARMS.

USER_REPCAT_TEMPLATE_SITES

The USER_REPCAT_TEMPLATE_SITES view provides the user with information about the current status of template instantiation among the sites of a enterprise network. This view contains information about instantiation sites for deployment templates that are owned by the current user. Specifically, the user can monitor the installation and deletion of templates at specific sites. Its columns are the same as those in ALL_REPCAT_TEMPLATE_SITES.

USER_REPCAT_USER_AUTHORIZATION

The USER_REPCAT_USER_AUTHORIZATION view lists the authorized users for all of the templates that are owned by the current user and specified for private use. Users listed in this view have the ability to instantiate the specified template. Users not contained in this view cannot instantiate the template. Its columns are the same as those in ALL_REPCAT_USER_AUTHORIZATIONS.

USER_REPCAT_USER_PARM_VALUES

The USER_REPCAT_USER_PARM_VALUES view describes the template parameters for all deployment templates owned by the current user. The DBA has the option of building a table of user parameters before distributing the template for instantiation. When a template is instantiated by a specified user, the values stored in the USER_REPCAT_USER_PARM_VALUES view for the specified user are used automatically.

Its columns are the same as those in ALL_REPCAT_USER_PARM_VALUES. For detailed information about this view and its columns, see ALL_REPCAT_USER_PARM_VALUES.

USER_REPCATLOG

The USER_REPCATLOG view at each master site contains the interim status of any asynchronous administrative requests and any error messages generated. All messages encountered while executing a request are eventually transferred to the USER_REPCATLOG view at the master site that originated the request. If an administrative request completes without error, then ultimately all traces of this request are removed from the USER_REPCATLOG view.

This view contains asynchronous administrative requests and error messages that are owned by the current user. Its columns are the same as those in ALL_REPCATLOG.

USER_REPCOLUMN

The USER_REPCOLUMN view lists the replicated columns for all the tables owned by the current user. Its columns are the same as those in ALL_REPCOLUMN.

USER_REPCOLUMN_GROUP

The USER_REPCOLUMN_GROUP view lists the column groups for each replicated table owned by the current user. Its columns are the same as those in ALL_REPCOLUMN_GROUP.

Note:

The SNAME column is not present in the USER_REPCOLUMN_GROUP view. This column is available in the ALL_REPCOLUMN_GROUP and DBA_REPCOLUMN_GROUP views.

USER_REPCONFLICT

The USER_REPCONFLICT view displays the name of each table owned by the current user on which a conflict resolution method has been defined and the type of conflict that the method is used to resolve. Its columns are the same as those in ALL_REPCONFLICT.

Note:

The SNAME column is not present in the USER_REPCONFLICT view. This column is available in the ALL_REPCONFLICT and DBA_REPCONFLICT views.

USER_REPDDL

The USER_REPDDL contains the DDL for each replication object owned by the current user. Its columns are the same as those in ALL_REPDDL.

USER_REPGENOBJECTS

The USER_REPGENOBJECTS view describes each object owned by the current user that was generated to support replication. Its columns are the same as those in ALL_REPGENOBJECTS.

USER_REPGROUP

The USER_REPGROUP view describes all of the replication groups owned by the current user. The members of each replication group are listed in a different view, USER_REPOBJECT. The USER_REPGROUP view's columns are the same as those in ALL_REPGROUP.

USER_REPGROUP_PRIVILEGES

The USER_REPGROUP_PRIVILEGES view contains information about the users who are registered for privileges in replication groups. Shows only those replication groups owned by the current user. Its columns are the same as those in ALL_REPGROUP_PRIVILEGES.

USER_REPGROUPED_COLUMN

The USER_REPGROUPED_COLUMN view lists all of the columns that comprise the column groups for each table. Its columns are the same as those in ALL_REPGROUPED_COLUMN.

Note:

The SNAME column is not present in the USER_REPGROUPED_COLUMN view. This column is available in the ALL_REPGROUPED_COLUMN and DBA_REPGROUPED_COLUMN views.

USER_REPKEY_COLUMNS

The USER_REPKEY_COLUMNS view describes the replication key column(s) in each table owned by the current user. Its columns are the same as those in ALL_REPKEY_COLUMNS.

USER_REPOBJECT

The USER_REPOBJECT view contains information about the objects owned by the current user in each replication group. An object can belong to only one replication group. A replication group can span multiple schemas. Its columns are the same as those in ALL_REPOBJECT.

USER_REPPARAMETER_COLUMN

In addition to the information contained in the USER_REPRESOLUTION view, the USER_REPPARAMETER_COLUMN view contains information about the columns that are used to resolve conflicts for each replicated table owned by the current user. These are the column values that are passed as the list_of_column_names argument to the ADD_conflicttype_RESOLUTION procedures in the DBMS_REPCAT package. Its columns are the same as those in ALL_REPPARAMETER_COLUMN.

Note:

The SNAME column is not present in the USER_REPPARAMETER_COLUMN view. This column is available in the ALL_REPPARAMETER_COLUMN and DBA_REPPARAMETER_COLUMN views.

USER_REPPRIORITY

The USER_REPPRIORITY view contains the value and priority level of each priority group member in each priority group owned by the current user. Priority group names must be unique within a replication group. Priority levels and values must each be unique within a given priority group. Its columns are the same as those in ALL_REPPRIORITY.

Note:

The SNAME column is not present in the USER_REPPRIORITY view. This column is available in the ALL_REPPRIORITY and DBA_REPPRIORITY views.

USER_REPPRIORITY_GROUP

The USER_REPPRIORITY_GROUP view describes the priority group or site priority group defined for each replication group owned by the current user. Its columns are the same as those in ALL_REPPRIORITY_GROUP.

USER_REPPROP

The USER_REPPROP view indicates the technique used to propagate operations on each replicated object to the same object at another master site. These operations might have resulted from a call to a stored procedure or procedure wrapper, or might have been issued against a table directly. This view shows objects owned by the current user. Its columns are the same as those in ALL_REPPROP.

USER_REPRESOL_STATS_CONTROL

The USER_REPRESOL_STATS_CONTROL view describes statistics collection for conflict resolutions for all replicated tables owned by the current user. Its columns are the same as those in ALL_REPRESOL_STATS_CONTROL.

Note:

The SNAME column is not present in the USER_REPRESOL_STATS_CONTROL view. This column is available in the ALL_REPRESOL_STATS_CONTROL and DBA_REPRESOL_STATS_CONTROL views.

USER_REPRESOLUTION

The USER_REPRESOLUTION view indicates the methods used to resolve update, uniqueness, or delete conflicts for each table owned by the current user that is replicated using row-level replication for a given schema. Its columns are the same as those in ALL_REPRESOLUTION.

Note:

The SNAME column is not present in the USER_REPREPRESOLUTION view. This column is available in the ALL_REPREPRESOLUTION and DBA_REPREPRESOLUTION views.

USER_REPRESOLUTION_METHOD

The USER_REPRESOLUTION_METHOD view lists all of the conflict resolution methods available in the database. Initially, this view lists the standard methods provided with the advanced replication facility. As you create new user functions and add them as conflict resolution methods for an object in the database, these functions are added to this view. Its columns are the same as those in ALL_REPRESOLUTION_METHOD.

USER_REPRESOLUTION_STATISTICS

The USER_REPRESOLUTION_STATISTICS view lists information about successfully resolved update, uniqueness, and delete conflicts for all replicated tables owned by the current user. These statistics are only gathered for a table if you have called the DBMS_REPCAT.REGISTER_STATISTICS procedure. The USER_REPRESOLUTION_STATISTICS view's columns are the same as those in ALL_REPRESOLUTION_STATISTICS.

Note:

The SNAME column is not present in the USER_REPRESOLUTION_STATISTICS view. This column is available in the ALL_REPRESOLUTION_STATISTICS and DBA_REPRESOLUTION_STATISTICS views.

USER_REPSITES

The USER_REPSITES view lists the members of each replication group owned by the current user. Its columns are the same as those in ALL_REPSITES.