B JMS and AQ XML Servlet Error Messages

A list of error messages is provided to aid you in troubleshooting problems.

JMS Error Messages

JMS-101 Invalid delivery mode (string)
Cause: The delivery mode is not supported
Action: The valid delivery mode is AQjmsConstants.PERSISTENT
JMS-102 Feature not supported (string)
Cause: This feature is not supported in the current release
Action: Self-explanatory
JMS-104 Message Payload must be specified
Cause: The message payload was null
Action: Specify a non-null payload for the message
JMS-105 Agent must be specified
Cause: AQjmsAgent object was null
Action: Specify a valid AQjmsAgent representing the remote subscriber
JMS-106 Cannot have more than one open Session on a JMSConnection
Cause: There is already one open JMS session on the connection. Cannot have more than one open session on a connection
Action: Close the open session and then open a new one
JMS-107 Operation not allowed on (string)
Cause: The specified operation is not allowed on this object
Action: Self-explanatory
JMS-108 Messages of type (string) not allowed with Destinations containing payload of type (string)
Cause: There was a mismatch between the message type being used and the payload type specified for the destination
Action: Use the message type that maps to the payload specified for the queue table that contains this destination
JMS-109 Class not found: (string)
Cause: The specified class was not found
Action: Make sure your CLASSPATH contains the class
JMS-110 Property (string) not writeable
Cause: An attempt was made to update a read-only message header field or property
Action: Self-explanatory
JMS-111 Connection must be specified
Cause: The connection object was null
Action: Specify a non-null JDBC connection
JMS-112 Connection is invalid
Cause: The JDBC connection is invalid
Action: Specify a non-null oracle JDBC connection
JMS-113 Connection is in stopped state
Cause: An attempt was made to receive messages on a connection that is in stopped state
Action: Start the connection
JMS-114 Connection is closed
Cause: An attempt was made to use a Connection that has been closed
Action: Create a new connection
JMS-115 Consumer is closed
Cause: An attempt was mode to use a Consumer that has been closed
Action: Create a new Message Consumer
JMS-116 Subscriber name must be specified
Cause: Subscriber name was null
Action: Specify a non-null subscription name
JMS-117 Conversion failed - invalid property type
Cause: An error occurred while converting the property to the requested type
Action: Use the method corresponding to the property data type to retrieve it
JMS-119 Invalid Property value
Cause: The property value specified is invalid
Action: Use the appropriate type of value for the property being set
JMS-120 Dequeue failed
Cause: An error occurred while receiving the message
Action: See message inside the JMSException and linked SQLException for more information
JMS-121 DestinationProperty must be specified
Cause: A null AQjmsDestinationProperty was specified while creating a queue/topic
Action: Specify a non-null AQjmsDestinationProperty for the destination
JMS-122 Internal error (string)
Cause: Internal error occurred
Action: Call Support
JMS-123 Interval must be at least (integer) seconds
Cause: An invalid interval was specified
Action: The interval must be greater than 30 seconds
JMS-124 Invalid Dequeue mode
Cause: Invalid dequeue mode was specified
Action: Valid Dequeue modes are AQConstants.DEQUEUE_BROWSE, AQConstants.DEQUEUE_REMOVE, AQConstants.DEQUEUE_LOCKED, AQConstants.DEQUEUE_REMOVE_NODATA
JMS-125 Invalid Queue specified
Cause: An invalid Queue object was specified
Action: Specify a valid Queue handle
JMS-126 Invalid Topic specified
Cause: An invalid Topic object was specified
Action: Specify a valid Topic handle
JMS-127 Invalid Destination
Cause: An invalid destination object was specified
Action: Specify a valid destination (Queue/Topic) object
JMS-128 Invalid Navigation mode
Cause: An invalid navigation mode was specified
Action: The valid navigation modes are AQjmsConstants.NAVIGATION_FIRST_MESSAGE, AQjmsConstants.NAVIGATION_NEXT_MESSAGE, AQjmsConstants.NAVIGATION_NEXT_TRANSACTION
JMS-129 Invalid Payload type
Cause: There was a mismatch between the message type being used and the payload type specified for the destination
Action: Use the message type that maps to the payload specified for the queue table that contains this destination. For ADT messages, use the appropriate CustomDatum factory to create the message consumer
JMS-130 JMS queue cannot be multi-consumer enabled
Cause: An attempt was made to get a AQ multi-consumer queue as a JMS queue
Action: JMS queues cannot be multi-consumer enabled
JMS-131 Session is closed
Cause: An attempt was made to use a session that has been closed
Action: Open a new session
JMS-132 Maximum number of properties (integer) exceeded
Cause: Maximum number of user defined properties for the message has been exceeded
Action: Self-explanatory
JMS-133 Message must be specified
Cause: Message specified was null
Action: Specify a non-null message
JMS-134 Name must be specified
Cause: Queue or Queue table Name specified was null
Action: Specify a non-null name
JMS-135 Driver (string) not supported
Cause: The specified driver is not supported
Action: Valid drivers are oci8 and thin. To use the kprb driver get the kprb connection using getDefaultConnection() and use the static createTopicConnection and createQueueConnection methods
JMS-136 Payload factory can only be specified for destinations with ADT payloads
Cause: A CustomDatumFactory was specified for consumers on destinations not containing ADT payloads
Action: This field must be set to null for destinations containing payloads of type SYS.AQ$_JMS_TEXT_MESSAGE, SYS.AQ$_JMS_BYTES_MESSAGE, SYS.AQ$_JMS_MAP_MESSAGE, SYS.AQ$_JMS_OBJECT_MESSAGE, SYS.AQ$_JMS_STREAM_MESSAGE
JMS-137 Payload factory must be specified for destinations with ADT payloads
Cause: CustomDatumFactory was not specified for destinations containing ADT payloads
Action: For destinations containing ADT messages, a CustomDatumFactory for a java class that maps to the SQL ADT type of the destination must be specified
JMS-138 Producer is closed
Cause: An attempt was made to use a producer that has been closed
Action: Create a new Message Producer
JMS-139 Property name must be specified
Cause: Property name was null
Action: Specify a non-null property name
JMS-140 Invalid System property
Cause: Invalid system property name specified.
Action: Specify one of the valid JMS system properties
JMS-142 JMS topic must be created in multi-consumer enabled queue tables
Cause: An attempt was made to create a JMS topic in a single-consumer queue table
Action: JMS topics can only be created in queue tables that are multi-consumer enabled
JMS-143 Queue must be specified
Cause: Null queue was specified
Action: Specify a non-null queue
JMS-144 JMS queue cannot be created in multiconsumer enabled queue tables
Cause: An attempt was made to create a JMS queue in a multi-consumer queue table
Action: JMS queues can only be created in queue tables that are not multi-consumer enabled
JMS-145 Invalid recipient list
Cause: The recipient list specified was empty
Action: Specify a recipient list with at least one recipient
JMS-146 Registration failed
Cause: An error occurred while registering the type in the type map
Action: Self-explanatory
JMS-147 Invalid ReplyTo destination type
Cause: The ReplyTo destination object type is invalid
Action: The ReplyTo destination must be of type AQjmsAgent
JMS-148 Property name size exceeded
Cause: The property name is greater than the maximum size
Action: Specify a property name that is less than 100 characters
JMS-149 Subscriber must be specified
Cause: Subscriber specified was null
Action: Specify a non-null subscriber
JMS-150 Property not supported
Cause: An attempt was made to use a property that is not supported
Action: Self-explanatory
JMS-151 Topics cannot be of type EXCEPTION
Cause: Topics cannot be of type AQjmsConstants.EXCEPTION
Action: Specify topics to be of type AQjmsConstants.NORMAL
JMS-153 Invalid System property type
Cause: The type of the value specified does not match the type defined for the system property being set
Action: Use the correct type for the setting the system property
JMS-154 Invalid value for sequence deviation
Cause: The sequence deviation is invalid
Action: Valid values are AQEnqueueOption.DEVIATION_BEFORE, AQEnqueueOption.DEVIATION_TOP
JMS-155 AQ Exception (string)
Cause: An error occurred in the AQ java layer
Action: See the message inside the JMSException and the linked exception for more information
JMS-156 Invalid Class (string)
Cause: Class specified is invalid
Action: Make sure your CLASSPATH has the specified class
JMS-157 IO Exception (string)
Cause: IO exception
Action: See message is JMSException for details
JMS-158 SQL Exception (string)
Cause: SQL Exception
Action: See message inside linked SQLException for details
JMS-159 Invalid selector (string)
Cause: The selector specified is either invalid or too long
Action: Check the syntax of the selector
JMS-160 EOF Exception (string)
Cause: EOF exception occurred while reading the byte stream
Action: Self-explanatory
JMS-161 MessageFormat Exception: (string)
Cause: An error occurred while converting the stream data to specified type
Action: Check the type of data expected on the stream and use the appropriate read method
JMS-162 Message not Readable
Cause: Message is in write-only mode
Action: Call the reset method to make the message readable
JMS-163 Message not Writeable
Cause: Message is in read-only mode
Action: Use the clearBody method to make the message writeable
JMS-164 No such element
Cause: Element with specified name was not found in the map message
Action: Self-explanatory
JMS-165 Maximum size of property value exceeded
Cause: The property value exceeded the maximum length allowed
Action: Values for JMS defined properties can be a maximum of length of 100, Values for User defined properties can have a maximum length of 2000
JMS-166 Topic must be specified
Cause: Topic specified was null
Action: Specify a non-null topic
JMS-167 Payload factory or Sql_data_class must be specified
Cause: Payload factory or Sql_data_class not specified for queues containing object payloads
Action: Specify a CustomDatumFactory or the SQLData class of the java object that maps to the ADT type defined for the queue.
JMS-168 Cannot specify both payload factory and sql_data_class
Cause: Both CustomDatumFactory and SQLData class were specified during dequeue
Action: Specify either the CustomDatumFactory or the SQLData class of the java object that maps to the ADT type defined for the queue.
JMS-169 Sql_data_class cannot be null
Cause: SQLData class specified is null
Action: Specify the SQLData class that maps to the ADT type defined for the queue
JMS-171 Message is not defined to contain (string)
Cause: Invalid payload type in message
Action: Check if the queue is defined to contain RAW or OBJECT payloads and use the appropriate payload type in the message
JMS-172 More than one queue table matches query (string)
Cause: More than one queue table matches the query
Action: Specify both owner and queue table name
JMS-173 Queue Table (string) not found
Cause: The specified queue table was not found
Action: Specify a valid queue table
JMS-174 Class must be specified for queues with object payloads\n. Use dequeue(deq_option,payload_fact) or dequeue(deq_option, sql_data_cl)
Cause: This dequeue method cannot be used to dequeue from queues with OBJECT payloads
Action: Use the either dequeue(deq_option, payload_fact) or dequeue(deq_option, sql_data_cl)
JMS-175 DequeueOption must be specified
Cause: DequeueOption specified is null
Action: Specify a non-null dequeue option
JMS-176 EnqueueOption must be specified
Cause: EnqueueOption specified is null
Action: Specify a non-null enqueue option
JMS-177 Invalid payload type: Use dequeue(deq_option) for raw payload queues
Cause: This method cannot be used to dequeue from queues with RAW payload
Action: Use the dequeue(deq_option) method
JMS-178 Invalid Queue name - (string)
Cause: The queue name specified is null or invalid
Action: Specify a queue name that is not null. The queue name must not be qualified with the schema name. The schema name must be specified as the value of the owner parameter
JMS-179 Invalid Queue Table name - (string)
Cause: The queue table name specified is null or invalid
Action: Specify a queue table name that is not null. The queue table name must not be qualified with the schema name. The schema name must be specified as the value of the owner parameter
JMS-180 Invalid Queue Type
Cause: Queue type is invalid
Action: Valid types are AQConstants.NORMAL or AQConstants.EXCEPTION
JMS-181 Invalid value for wait_time
Cause: Invalid value for wait type
Action: Wait time can be AQDequeueOption.WAIT_FOREVER, AQDequeueOption.WAIT_NONE or any value greater than 0
JMS-182 More than one queue matches query
Cause: More than one queue matches query
Action: Specify both the owner and name of the queue
JMS-183 No AQ driver registered
Cause: No AQDriver registered
Action: Make sure that the AQ java driver is registered. Use Class.forName("oracle.AQ.AQOracleDriver")
JMS-184 Queue object is invalid
Cause: The queue object is invalid
Action: The underlying JDBC connection may have been closed. Get the queue handle again
JMS-185 QueueProperty must be specified
Cause: AQQueueProperty specified is null
Action: Specify a non-null AQQueueProperty
JMS-186 QueueTableProperty must be specified
Cause: QueueTableProperty specified is null
Action: Specify a non-null AQQueueTableProperty
JMS-187 Queue Table must be specified
Cause: Queue Table specified is null
Action: Specify a non-null queue table
JMS-188 QueueTable object is invalid
Cause: The queue table object is invalid
Action: The underlying JDBC connection may have been closed. Get the queue table handle again
JMS-189 Byte array too small
Cause: The byte array given is too small to hold the data requested
Action: Specify a byte array that is large enough to hold the data requested or reduce the length requested
JMS-190 Queue (string) not found
Cause: The specified queue was not found
Action: Specify a valid queue
JMS-191 sql_data_cl must be a class that implements SQLData interface
Cause: The class specified does not support the java.sql.SQLData interface
Action: Self-explanatory
JMS-192 Invalid Visibility value
Cause: Visibility value specified is invalid
Action: Valid values areAQConstants.VISIBILITY_ONCOMMIT, AQConstants.VISIBILITY_IMMEDIATE
JMS-193 JMS queues cannot contain payload of type RAW
Cause: An attempt was made to create a JMS queue with RAW payload
Action: JMS queues/topics cannot contain RAW payload
JMS-194 Session object is invalid
Cause: Session object is invalid
Action: The underlying JDBC connection may have been closed. Create a new session
JMS-195 Invalid object type: object must implement CustomDatum or SQLData interface
Cause: Invalid object type specified
Action: Object must implement CustomDatum or SQLData interface
JMS-196 Cannot have more than one open QueueBrowser for the same destination on a JMS Session
Cause: There is already an open QueueBrowser for this queue on this session
Action: There cannot be more than one queue browser for the same queue in a particular session. Close the existing QueueBrowser and then open a new one
JMS-197 Agent address must be specified for remote subscriber
Cause: Address field is null for remote subscriber
Action: The address field must contain the fully qualified name of the remote topic
JMS-198 Invalid operation: Privileged message listener set for the Session
Cause: The client tried to use a message consumer to receive messages when the session message listener was set.
Action: Use the session's message listener to consume messages. The consumer's methods for receiving messages must not be used.
JMS-199 Registration for notification failed
Cause: Listener Registration failed
Action: See error message in linked Exception for details
JMS-200 Destination must be specified
Cause: Destination is null
Action: Specify a non-null destination
JMS-201 All Recipients in recipient_list must be specified
Cause: One or more elements in the recipient list are null
Action: All AQjmsAgents in the recipient list must be specified
JMS-202 Unregister for asynchronous receipt of messages failed
Cause: An error occurred while removing the registration of the consumer with the database for asynchronous receipt
Action: Check error message in linked exception for details
JMS-203 Payload Factory must be specified
Cause: Null Payload Factory was specified
Action: Specify a non null payload factory
JMS-204 An error occurred in the AQ JNI layer
Cause: JNI Error
Action: Check error message in linked exception for details
JMS-205 Naming Exception
Cause: Naming exception
Action: Check error message in linked exception for details
JMS-206 XA Exception XAError-{0} :: OracleError-{1}
Cause: An error occurred in the XA layer
Action: See the message inside the linked XAException for more information
JMS-207 JMS Exception {0}
Cause: An error occurred in the JMS layer
Action: See the message inside the linked JMSException for more information
JMS-208 XML SQL Exception
Cause: An error occurred in the XML SQL layer
Action: See the message inside the linked AQxmlException for more information
JMS-209 XML SAX Exception
Cause: An error occurred in the XML SAX layer
Action: See the message inside the linked AQxmlException for more information
JMS-210 XML Parse Exception
Cause: An error occurred in the XML Parser layer
Action: See the message inside the linked AQxmlException for more information
JMS-220 Connection no longer available
Cause: Connection to the database no longer available.
Action: Comment: This may happen if the database/network/machine is not accessible. This may be a transient failure.
JMS-221 Free physical database connection unavailable in connection pool
Cause: A free physical database connection was not available in the OCI connection pool in order to perform the specified operation.
Action: Try performing the operation later

AQ XML Servlet Error Messages

JMS-400 Destination name must be specified
Cause: A null Destination name was specified
Action: Specify a non-null destination name
JMS-402 Class not found: {0}
Cause: The specified class was not found
Action: Make sure your CLASSPATH contains the class specified in the error message
JMS-403 IO Exception {0}
Cause: IO exception
Action: See the message inside the linked AQxmlException for more information
JMS-404 XML Parse Exception
Cause: An error occurred in the XML Parser layer
Action: See the message inside the linked AQxmlException for more information
JMS-405 XML SAX Exception
Cause: An error occurred in the XML SAX layer
Action: See the message inside the linked AQxmlException for more information
JMS-406 JMS Exception {0}
Cause: An error occurred in the JMS layer
Action: See the message inside the linked JMSException for more information
JMS-407 Operation not allowed on {0}
Cause: The specified operation is not allowed on this object
Action: Check that the user performing the operation has the required privileges
JMS-408 Conversion failed - invalid property type
Cause: An error occurred while converting the property to the requested type
Action: Use the method corresponding to the property data type to retrieve it
JMS-409 No such element
Cause: Element with specified name was not found in the map message
Action: Specify a valid element name
JMS-410 XML SQL Exception
Cause: An error occurred in the JDBC SQL layer
Action: See the message inside the linked SQLException for more information
JMS-411 Payload body cannot be null
Cause: An invalid body string or document was specified
Action: Specify a non-null body string or document for the payload
JMS-412 Byte conversion failed
Cause: An invalid username/password was specified
Action: Specify a non-null username and password
JMS-413 Autocommit not allowed for operation
Cause: The autocommit flag cannot be set for this operation
Action: Do not set the autocommit flag
JMS-414 Destination owner must be specified
Cause: A null Destination owner was specified
Action: Specify a non-null destination name
JMS-415 Invalid Visibility value
Cause: Visibility value specified is invalid
Action: Valid values are AQxmlConstants.VISIBILITY_ONCOMMIT, AQxmlConstants.VISIBILITY_IMMEDIATE
JMS-416 Invalid Dequeue mode
Cause: Invalid dequeue mode was specified
Action: Valid Dequeue modes are AQxmlConstants.DEQUEUE_BROWSE, AQxmlConstants.DEQUEUE_REMOVE, AQxmlConstants.DEQUEUE_LOCKED, AQxmlConstants.DEQUEUE_REMOVE_NODATA
JMS-417 Invalid Navigation mode
Cause: An invalid navigation mode was specified
Action: The valid navigation modes are:

  • AQxmlConstants.NAVIGATION_FIRST_MESSAGE

  • AQxmlConstants.NAVIGATION_NEXT_MESSAGE

  • AQxmlConstants.NAVIGATION_NEXT_TRANSACTION

JMS-418 Invalid value for wait_time
Cause: Invalid value for wait type
Action: Wait time can be AQDequeueOption.WAIT_FOREVER, AQDequeueOption.WAIT_NONE, or any value greater than 0
JMS-419 Invalid ConnectionPoolDataSource
Cause: A null or invalid ConnectionPoolDataSource was specified
Action: Specify a valid OracleConnectionPoolDataSource object with the correct URL and user/password
JMS-420 Invalid value for cache_size
Cause: An invalid cache_size was specified
Action: Cache size must be greater than 0
JMS-421 Invalid value for cache_scheme
Cause: An invalid cache scheme was specified
Action: The valid cache schemes are:

  • OracleConnectionCacheImpl.DYNAMIC_SCHEME

  • OracleConnectionCacheImpl.FIXED_WAIT_SCHEME

JMS-422 Invalid tag - {0}
Cause: An invalid tag was encountered in the XML document
Action: Verify that the XML document conforms to the AQ schema
JMS-423 Invalid value
Cause: An invalid value was specified
Action: Verify that the value specified in the XML document conforms to those specified in the AQ schema
JMS-424 Invalid message header
Cause: The message header specified is null or invalid
Action: Specify a valid message header
JMS-425 Property name must be specified
Cause: Property name was null
Action: Specify a non-null property name
JMS-426 Property does not exist
Cause: Invalid property name specified. The property does not exist
Action: The property does not exist
JMS-427 Subscriber name must be specified
Cause: Subscriber name was null
Action: Specify a non-null subscription name
JMS-428 Valid message must be specified
Cause: Message was null
Action: Specify a non-null message
JMS-429 Register Option must be specified
Cause: Register option is null
Action: Specify a non-null Register Option
JMS-430 Database Link must be specified
Cause: DB Link is null
Action: Specify a non-null Register Option
JMS-431 Sequence Number must be specified
Cause: Register option is null
Action: Specify a non-null Register Option
JMS-432 Status must be specified
Cause: Status option is null
Action: Specify a non-null Register Option
JMS-433 User not authenticated
Cause: User is not authenticated
Action: Check that the user was authenticated by the webserver before connecting to the Servlet
JMS-434 Invalid data source
Cause: Data source is null or invalid
Action: Specify a valid data source for connecting to the database
JMS-435 Invalid schema location
Cause: Schema location is null or invalid
Action: Specify a valid URL for the schema
JMS-436 AQ Exception
Cause: An error occurred in the AQ java layer
Action: See the message inside the AQxmlException and the linked exception for more information
JMS-437 Invalid Destination
Cause: An invalid destination object was specified
Action: Specify a valid destination (Queue/Topic) object
JMS-438 AQ agent {0} not mapped to a valid database user
Cause: The AQ agent specified does not map to a database user which has privileges to perform the requested operation
Action: Use dbms_aqadm.enable_db_access to map the agent to a database user with the required queue privileges
JMS-439 Invalid schema document
Cause: The schema document specified is not valid
Action: Specify a valid URL for the schema document
JMS-440 Invalid operations - agent {0} maps to more than one database user
Cause: The AQ agent mapped to more than one database user in the same session
Action: Map the AQ agent to only one database user. Check the aq$internet_users view for database users that map to this agent.