6 The Data Pump API

The Data Pump API, DBMS_DATAPUMP, provides a high-speed mechanism to move all or part of the data and metadata for a site from one database to another. The Data Pump Export and Data Pump Import utilities are based on the Data Pump API.

This chapter provides details about how the Data Pump API works. The following topics are covered:

How Does the Client Interface to the Data Pump API Work?

The main structure used in the client interface is a job handle, which appears to the caller as an integer. Handles are created using the DBMS_DATAPUMP.OPEN or DBMS_DATAPUMP.ATTACH function. Other sessions can attach to a job to monitor and control its progress. This allows a DBA to start up a job before departing from work and then watch the progress of the job from home. Handles are session specific. The same job can create different handles in different sessions.

Job States

There is a state associated with each phase of a job, as follows:

  • Undefined - before a handle is created

  • Defining - when the handle is first created

  • Executing - when the DBMS_DATAPUMP.START_JOB procedure is executed

  • Completing - when the job has finished its work and the Data Pump processes are ending

  • Completed - when the job is completed

  • Stop Pending - when an orderly job shutdown has been requested

  • Stopping - when the job is stopping

  • Idling - the period between the time that a DBMS_DATAPUMP.ATTACH is executed to attach to a stopped job and the time that a DBMS_DATAPUMP.START_JOB is executed to restart that job

  • Not Running - when a master table exists for a job that is not running (has no Data Pump processes associated with it)

Performing DBMS_DATAPUMP.START_JOB on a job in an Idling state will return it to an Executing state.

If all users execute DBMS_DATAPUMP.DETACH to detach from a job in the Defining state, then the job will be totally removed from the database.

When a job abnormally terminates or when an instance running the job is shut down, the job is placed in the Not Running state if it was previously executing or idling. It can then be restarted by the user.

The master control process is active in the Defining, Idling, Executing, Stopping, Stop Pending, and Completing states. It is also active briefly in the Stopped and Completed states. The master table for the job exists in all states except the Undefined state. Worker processes are only active in the Executing and Stop Pending states, and briefly in the Defining state for import jobs.

Detaching while a job is in the Executing state will not halt the job, and you can re-attach to an executing job at any time to resume obtaining status information about the job.

A Detach can occur explicitly, when the DBMS_DATAPUMP.DETACH procedure is executed, or it can occur implicitly when a Data Pump API session is run down, when the Data Pump API is unable to communicate with a Data Pump job, or when the DBMS_DATAPUMP.STOP_JOB procedure is executed.

The Not Running state indicates that a master table exists outside the context of an executing job. This will occur if a job has been stopped (probably to be restarted later) or if a job has abnormally terminated. This state can also be seen momentarily during job state transitions at the beginning of a job, and at the end of a job before the master table is dropped. Note that the Not Running state is shown only in the DBA_DATAPUMP_JOBS view and the USER_DATAPUMP_JOBS view. It is never returned by the GET_STATUS procedure.

Table 6-1 shows the valid job states in which DBMS_DATAPUMP procedures can be executed. The states listed are valid for both export and import jobs, unless otherwise noted.

Table 6-1 Valid Job States in Which DBMS_DATAPUMP Procedures Can Be Executed

Procedure Name Valid States Description
ADD_FILE

Defining (valid for both export and import jobs)

Executing and Idling (valid only for specifying dump files for export jobs)

Specifies a file for the dump file set, the log file, or the SQLFILE output.

ATTACH

Defining, Executing, Idling, Stopped, Completed, Completing, Not Running

Allows a user session to monitor a job or to restart a stopped job. The attach will fail if the dump file set or master table for the job have been deleted or altered in any way.

DATA_FILTER

Defining

Restricts data processed by a job.

DETACH

All

Disconnects a user session from a job.

GET_DUMPFILE_INFO

All

Retrieves dump file header information.

GET_STATUS

All, except Completed, Not Running, Stopped, and Undefined

Obtains the status of a job.

LOG_ENTRY

Defining, Executing, Idling, Stop Pending, Completing

Adds an entry to the log file.

METADATA_FILTER

Defining

Restricts metadata processed by a job.

METADATA_REMAP

Defining

Remaps metadata processed by a job.

METADATA_TRANSFORM

Defining

Alters metadata processed by a job.

OPEN

Undefined

Creates a new job.

SET_PARALLEL

Defining, Executing, Idling

Specifies parallelism for a job.

SET_PARAMETER

DefiningFoot 1 

Alters default processing by a job.

START_JOB

Defining, Idling

Begins or resumes execution of a job.

STOP_JOB

Defining, Executing, Idling, Stop Pending

Initiates shutdown of a job.

WAIT_FOR_JOB

All, except Completed, Not Running, Stopped, and Undefined

Waits for a job to end.


Footnote 1 The ENCRYPTION_PASSWORD parameter can be entered during the Idling state, as well as during the Defining state.

What Are the Basic Steps in Using the Data Pump API?

To use the Data Pump API, you use the procedures provided in the DBMS_DATAPUMP package. The following steps list the basic activities involved in using the Data Pump API. The steps are presented in the order in which the activities would generally be performed:

  1. Execute the DBMS_DATAPUMP.OPEN procedure to create a Data Pump job and its infrastructure.

  2. Define any parameters for the job.

  3. Start the job.

  4. Optionally, monitor the job until it completes.

  5. Optionally, detach from the job and reattach at a later time.

  6. Optionally, stop the job.

  7. Optionally, restart the job, if desired.

These concepts are illustrated in the examples provided in the next section.

See Also:

Oracle Database PL/SQL Packages and Types Reference for a complete description of the DBMS_DATAPUMP package

Examples of Using the Data Pump API

This section provides the following examples to help you get started using the Data Pump API:

The examples are in the form of PL/SQL scripts. If you choose to copy these scripts and run them, then you must first do the following, using SQL*Plus:

  • Create a directory object and grant READ and WRITE access to it. For example, to create a directory object named dmpdir to which you have access, do the following. Replace user with your username.

    SQL> CREATE DIRECTORY dmpdir AS '/rdbms/work';
    SQL> GRANT READ, WRITE ON DIRECTORY dmpdir TO user;
    
  • Ensure that you have the EXP_FULL_DATABASE and IMP_FULL_DATABASE roles. To see a list of all roles assigned to you within your security domain, do the following:

    SQL> SELECT * FROM SESSION_ROLES;
    

    If you do not have the necessary roles assigned to you, then contact your system administrator for help.

  • Turn on server output if it is not already on. This is done as follows:

    SQL> SET SERVEROUTPUT ON
    

    If you do not do this, then you will not see any output to your screen. You must do this in the same session in which you invoke the example. If you exit SQL*Plus, then this setting is lost and must be reset when you begin a new session. (It must also be reset if you connect to a different user name.)

Example 6-1 Performing a Simple Schema Export

The PL/SQL script in this example shows how to use the Data Pump API to perform a simple schema export of the HR schema. It shows how to create a job, start it, and monitor it. Additional information about the example is contained in the comments within the script. To keep the example simple, exceptions from any of the API calls will not be trapped. However, in a production environment, Oracle recommends that you define exception handlers and call GET_STATUS to retrieve more detailed error information when a failure occurs.

Connect as user SYSTEM to use this script.

DECLARE
  ind NUMBER;              -- Loop index
  h1 NUMBER;               -- Data Pump job handle
  percent_done NUMBER;     -- Percentage of job complete
  job_state VARCHAR2(30);  -- To keep track of job state
  le ku$_LogEntry;         -- For WIP and error messages
  js ku$_JobStatus;        -- The job status from get_status
  jd ku$_JobDesc;          -- The job description from get_status
  sts ku$_Status;          -- The status object returned by get_status
BEGIN

-- Create a (user-named) Data Pump job to do a schema export.

  h1 := DBMS_DATAPUMP.OPEN('EXPORT','SCHEMA',NULL,'EXAMPLE1','LATEST');

-- Specify a single dump file for the job (using the handle just returned)
-- and a directory object, which must already be defined and accessible
-- to the user running this procedure.

  DBMS_DATAPUMP.ADD_FILE(h1,'example1.dmp','DMPDIR');

-- A metadata filter is used to specify the schema that will be exported.

  DBMS_DATAPUMP.METADATA_FILTER(h1,'SCHEMA_EXPR','IN (''HR'')');

-- Start the job. An exception will be generated if something is not set up
-- properly. 

  DBMS_DATAPUMP.START_JOB(h1);

-- The export job should now be running. In the following loop, the job
-- is monitored until it completes. In the meantime, progress information is
-- displayed.
 
  percent_done := 0;
  job_state := 'UNDEFINED';
  while (job_state != 'COMPLETED') and (job_state != 'STOPPED') loop
    dbms_datapump.get_status(h1,
           dbms_datapump.ku$_status_job_error +
           dbms_datapump.ku$_status_job_status +
           dbms_datapump.ku$_status_wip,-1,job_state,sts);
    js := sts.job_status;

-- If the percentage done changed, display the new value.

    if js.percent_done != percent_done
    then
      dbms_output.put_line('*** Job percent done = ' ||
                           to_char(js.percent_done));
      percent_done := js.percent_done;
    end if;

-- If any work-in-progress (WIP) or error messages were received for the job,
-- display them.

   if (bitand(sts.mask,dbms_datapump.ku$_status_wip) != 0)
    then
      le := sts.wip;
    else
      if (bitand(sts.mask,dbms_datapump.ku$_status_job_error) != 0)
      then
        le := sts.error;
      else
        le := null;
      end if;
    end if;
    if le is not null
    then
      ind := le.FIRST;
      while ind is not null loop
        dbms_output.put_line(le(ind).LogText);
        ind := le.NEXT(ind);
      end loop;
    end if;
  end loop;

-- Indicate that the job finished and detach from it.

  dbms_output.put_line('Job has completed');
  dbms_output.put_line('Final job state = ' || job_state);
  dbms_datapump.detach(h1);
END;
/

Example 6-2 Importing a Dump File and Remapping All Schema Objects

The script in this example imports the dump file created in Example 6-1 (an export of the hr schema). All schema objects are remapped from the hr schema to the blake schema. To keep the example simple, exceptions from any of the API calls will not be trapped. However, in a production environment, Oracle recommends that you define exception handlers and call GET_STATUS to retrieve more detailed error information when a failure occurs.

Connect as user SYSTEM to use this script.

DECLARE
  ind NUMBER;              -- Loop index
  h1 NUMBER;               -- Data Pump job handle
  percent_done NUMBER;     -- Percentage of job complete
  job_state VARCHAR2(30);  -- To keep track of job state
  le ku$_LogEntry;         -- For WIP and error messages
  js ku$_JobStatus;        -- The job status from get_status
  jd ku$_JobDesc;          -- The job description from get_status
  sts ku$_Status;          -- The status object returned by get_status
BEGIN

-- Create a (user-named) Data Pump job to do a "full" import (everything
-- in the dump file without filtering).

  h1 := DBMS_DATAPUMP.OPEN('IMPORT','FULL',NULL,'EXAMPLE2');

-- Specify the single dump file for the job (using the handle just returned)
-- and directory object, which must already be defined and accessible
-- to the user running this procedure. This is the dump file created by
-- the export operation in the first example.

  DBMS_DATAPUMP.ADD_FILE(h1,'example1.dmp','DMPDIR');

-- A metadata remap will map all schema objects from HR to BLAKE.

  DBMS_DATAPUMP.METADATA_REMAP(h1,'REMAP_SCHEMA','HR','BLAKE');

-- If a table already exists in the destination schema, skip it (leave
-- the preexisting table alone). This is the default, but it does not hurt
-- to specify it explicitly.

  DBMS_DATAPUMP.SET_PARAMETER(h1,'TABLE_EXISTS_ACTION','SKIP');

-- Start the job. An exception is returned if something is not set up properly.

  DBMS_DATAPUMP.START_JOB(h1);

-- The import job should now be running. In the following loop, the job is 
-- monitored until it completes. In the meantime, progress information is 
-- displayed. Note: this is identical to the export example.
 
 percent_done := 0;
  job_state := 'UNDEFINED';
  while (job_state != 'COMPLETED') and (job_state != 'STOPPED') loop
    dbms_datapump.get_status(h1,
           dbms_datapump.ku$_status_job_error +
           dbms_datapump.ku$_status_job_status +
           dbms_datapump.ku$_status_wip,-1,job_state,sts);
    js := sts.job_status;

-- If the percentage done changed, display the new value.

     if js.percent_done != percent_done
    then
      dbms_output.put_line('*** Job percent done = ' ||
                           to_char(js.percent_done));
      percent_done := js.percent_done;
    end if;

-- If any work-in-progress (WIP) or Error messages were received for the job,
-- display them.

       if (bitand(sts.mask,dbms_datapump.ku$_status_wip) != 0)
    then
      le := sts.wip;
    else
      if (bitand(sts.mask,dbms_datapump.ku$_status_job_error) != 0)
      then
        le := sts.error;
      else
        le := null;
      end if;
    end if;
    if le is not null
    then
      ind := le.FIRST;
      while ind is not null loop
        dbms_output.put_line(le(ind).LogText);
        ind := le.NEXT(ind);
      end loop;
    end if;
  end loop;

-- Indicate that the job finished and gracefully detach from it. 

  dbms_output.put_line('Job has completed');
  dbms_output.put_line('Final job state = ' || job_state);
  dbms_datapump.detach(h1);
END;
/

Example 6-3 Using Exception Handling During a Simple Schema Export

The script in this example shows a simple schema export using the Data Pump API. It extends Example 6-1 to show how to use exception handling to catch the SUCCESS_WITH_INFO case, and how to use the GET_STATUS procedure to retrieve additional information about errors. If you want to get exception information about a DBMS_DATAPUMP.OPEN or DBMS_DATAPUMP.ATTACH failure, then call DBMS_DATAPUMP.GET_STATUS with a DBMS_DATAPUMP.KU$_STATUS_JOB_ERROR information mask and a NULL job handle to retrieve the error details.

Connect as user SYSTEM to use this example.

DECLARE
  ind NUMBER;              -- Loop index
  spos NUMBER;             -- String starting position
  slen NUMBER;             -- String length for output
  h1 NUMBER;               -- Data Pump job handle
  percent_done NUMBER;     -- Percentage of job complete
  job_state VARCHAR2(30);  -- To keep track of job state
  le ku$_LogEntry;         -- For WIP and error messages
  js ku$_JobStatus;        -- The job status from get_status
  jd ku$_JobDesc;          -- The job description from get_status
  sts ku$_Status;          -- The status object returned by get_status
BEGIN

-- Create a (user-named) Data Pump job to do a schema export.

  h1 := dbms_datapump.open('EXPORT','SCHEMA',NULL,'EXAMPLE3','LATEST');

-- Specify a single dump file for the job (using the handle just returned)
-- and a directory object, which must already be defined and accessible
-- to the user running this procedure.

  dbms_datapump.add_file(h1,'example3.dmp','DMPDIR');

-- A metadata filter is used to specify the schema that will be exported.

  dbms_datapump.metadata_filter(h1,'SCHEMA_EXPR','IN (''HR'')');

-- Start the job. An exception will be returned if something is not set up
-- properly.One possible exception that will be handled differently is the
-- success_with_info exception. success_with_info means the job started
-- successfully, but more information is available through get_status about
-- conditions around the start_job that the user might want to be aware of.

    begin
    dbms_datapump.start_job(h1);
    dbms_output.put_line('Data Pump job started successfully');
    exception
      when others then
        if sqlcode = dbms_datapump.success_with_info_num
        then
          dbms_output.put_line('Data Pump job started with info available:');
          dbms_datapump.get_status(h1,
                                   dbms_datapump.ku$_status_job_error,0,
                                   job_state,sts);
          if (bitand(sts.mask,dbms_datapump.ku$_status_job_error) != 0)
          then
            le := sts.error;
            if le is not null
            then
              ind := le.FIRST;
              while ind is not null loop
                dbms_output.put_line(le(ind).LogText);
                ind := le.NEXT(ind);
              end loop;
            end if;
          end if;
        else
          raise;
        end if;
  end;

-- The export job should now be running. In the following loop, we will monitor
-- the job until it completes. In the meantime, progress information is
-- displayed.
 
 percent_done := 0;
  job_state := 'UNDEFINED';
  while (job_state != 'COMPLETED') and (job_state != 'STOPPED') loop
    dbms_datapump.get_status(h1,
           dbms_datapump.ku$_status_job_error +
           dbms_datapump.ku$_status_job_status +
           dbms_datapump.ku$_status_wip,-1,job_state,sts);
    js := sts.job_status;

-- If the percentage done changed, display the new value.

     if js.percent_done != percent_done
    then
      dbms_output.put_line('*** Job percent done = ' ||
                           to_char(js.percent_done));
      percent_done := js.percent_done;
    end if;

-- Display any work-in-progress (WIP) or error messages that were received for
-- the job.

      if (bitand(sts.mask,dbms_datapump.ku$_status_wip) != 0)
    then
      le := sts.wip;
    else
      if (bitand(sts.mask,dbms_datapump.ku$_status_job_error) != 0)
      then
        le := sts.error;
      else
        le := null;
      end if;
    end if;
    if le is not null
    then
      ind := le.FIRST;
      while ind is not null loop
        dbms_output.put_line(le(ind).LogText);
        ind := le.NEXT(ind);
      end loop;
    end if;
  end loop;

-- Indicate that the job finished and detach from it.

  dbms_output.put_line('Job has completed');
  dbms_output.put_line('Final job state = ' || job_state);
  dbms_datapump.detach(h1);

-- Any exceptions that propagated to this point will be captured. The
-- details will be retrieved from get_status and displayed.

  exception
    when others then
      dbms_output.put_line('Exception in Data Pump job');
      dbms_datapump.get_status(h1,dbms_datapump.ku$_status_job_error,0,
                               job_state,sts);
      if (bitand(sts.mask,dbms_datapump.ku$_status_job_error) != 0)
      then
        le := sts.error;
        if le is not null
        then
          ind := le.FIRST;
          while ind is not null loop
            spos := 1;
            slen := length(le(ind).LogText);
            if slen > 255
            then
              slen := 255;
            end if;
            while slen > 0 loop
              dbms_output.put_line(substr(le(ind).LogText,spos,slen));
              spos := spos + 255;
              slen := length(le(ind).LogText) + 1 - spos;
            end loop;
            ind := le.NEXT(ind);
          end loop;
        end if;
      end if;
END;
/

Example 6-4 Displaying Dump File Information

The PL/SQL script in this example shows how to use the Data Pump API procedure DBMS_DATAPUMP.GET_DUMPFILE_INFO to display information about a Data Pump dump file outside the context of any Data Pump job. This example displays information contained in the example1.dmp dump file created by the sample PL/SQL script in Example 6-1.

This PL/SQL script can also be used to display information for dump files created by original Export (the exp utility) as well as by the ORACLE_DATAPUMP external tables access driver.

Connect as user SYSTEM to use this script.

SET VERIFY OFF
SET FEEDBACK OFF
 
DECLARE
  ind        NUMBER;
  fileType   NUMBER;
  value      VARCHAR2(2048);
  infoTab    KU$_DUMPFILE_INFO := KU$_DUMPFILE_INFO();
 
BEGIN
  --
  -- Get the information about the dump file into the infoTab.
  --
  BEGIN
    DBMS_DATAPUMP.GET_DUMPFILE_INFO('example1.dmp','DMPDIR',infoTab,fileType);
    DBMS_OUTPUT.PUT_LINE('---------------------------------------------');
    DBMS_OUTPUT.PUT_LINE('Information for file: example1.dmp');
 
    --
    -- Determine what type of file is being looking at.
    --
    CASE fileType
      WHEN 1 THEN
        DBMS_OUTPUT.PUT_LINE('example1.dmp is a Data Pump dump file');
      WHEN 2 THEN
        DBMS_OUTPUT.PUT_LINE('example1.dmp is an Original Export dump file');
      ELSE
        DBMS_OUTPUT.PUT_LINE('example1.dmp is not a dump file');
        DBMS_OUTPUT.PUT_LINE('---------------------------------------------');
    END CASE;
 
  EXCEPTION
    WHEN OTHERS THEN
      DBMS_OUTPUT.PUT_LINE('---------------------------------------------');
      DBMS_OUTPUT.PUT_LINE('Error retrieving information for file: ' ||
                           'example1.dmp');
      DBMS_OUTPUT.PUT_LINE(SQLERRM);
      DBMS_OUTPUT.PUT_LINE('---------------------------------------------');
      fileType := 0;
  END;
 
  --
  -- If a valid file type was returned, then loop through the infoTab and 
  -- display each item code and value returned.
  --
  IF fileType > 0
  THEN
    DBMS_OUTPUT.PUT_LINE('The information table has ' || 
                          TO_CHAR(infoTab.COUNT) || ' entries');
    DBMS_OUTPUT.PUT_LINE('---------------------------------------------');
 
    ind := infoTab.FIRST;
    WHILE ind IS NOT NULL
    LOOP
      --
      -- The following item codes return boolean values in the form
      -- of a '1' or a '0'. We'll display them as 'Yes' or 'No'.
      --
      value := NVL(infoTab(ind).value, 'NULL');
      IF infoTab(ind).item_code IN
         (DBMS_DATAPUMP.KU$_DFHDR_MASTER_PRESENT,
          DBMS_DATAPUMP.KU$_DFHDR_DIRPATH,
          DBMS_DATAPUMP.KU$_DFHDR_METADATA_COMPRESSED,
          DBMS_DATAPUMP.KU$_DFHDR_DATA_COMPRESSED,
          DBMS_DATAPUMP.KU$_DFHDR_METADATA_ENCRYPTED,
          DBMS_DATAPUMP.KU$_DFHDR_DATA_ENCRYPTED,
          DBMS_DATAPUMP.KU$_DFHDR_COLUMNS_ENCRYPTED)
      THEN
        CASE value
          WHEN '1' THEN value := 'Yes';
          WHEN '0' THEN value := 'No';
        END CASE;
      END IF;
 
      --
      -- Display each item code with an appropriate name followed by
      -- its value.
      --
      CASE infoTab(ind).item_code
        --
        -- The following item codes have been available since Oracle Database 10g
        -- Release 10.2.
        --
        WHEN DBMS_DATAPUMP.KU$_DFHDR_FILE_VERSION   THEN
          DBMS_OUTPUT.PUT_LINE('Dump File Version:         ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_MASTER_PRESENT THEN
          DBMS_OUTPUT.PUT_LINE('Master Table Present:      ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_GUID THEN
          DBMS_OUTPUT.PUT_LINE('Job Guid:                  ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_FILE_NUMBER THEN
          DBMS_OUTPUT.PUT_LINE('Dump File Number:          ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_CHARSET_ID  THEN
          DBMS_OUTPUT.PUT_LINE('Character Set ID:          ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_CREATION_DATE THEN
          DBMS_OUTPUT.PUT_LINE('Creation Date:             ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_FLAGS THEN
          DBMS_OUTPUT.PUT_LINE('Internal Dump Flags:       ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_JOB_NAME THEN
          DBMS_OUTPUT.PUT_LINE('Job Name:                  ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_PLATFORM THEN
          DBMS_OUTPUT.PUT_LINE('Platform Name:             ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_INSTANCE THEN
          DBMS_OUTPUT.PUT_LINE('Instance Name:             ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_LANGUAGE THEN
          DBMS_OUTPUT.PUT_LINE('Language Name:             ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_BLOCKSIZE THEN
          DBMS_OUTPUT.PUT_LINE('Dump File Block Size:      ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_DIRPATH THEN
          DBMS_OUTPUT.PUT_LINE('Direct Path Mode:          ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_METADATA_COMPRESSED THEN
          DBMS_OUTPUT.PUT_LINE('Metadata Compressed:       ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_DB_VERSION THEN
          DBMS_OUTPUT.PUT_LINE('Database Version:          ' || value);
 
        --
        -- The following item codes were introduced in Oracle Database 11g
        -- Release 11.1
        --
        WHEN DBMS_DATAPUMP.KU$_DFHDR_MASTER_PIECE_COUNT THEN
          DBMS_OUTPUT.PUT_LINE('Master Table Piece Count:  ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_MASTER_PIECE_NUMBER THEN
          DBMS_OUTPUT.PUT_LINE('Master Table Piece Number: ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_DATA_COMPRESSED THEN
          DBMS_OUTPUT.PUT_LINE('Table Data Compressed:     ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_METADATA_ENCRYPTED THEN
          DBMS_OUTPUT.PUT_LINE('Metadata Encrypted:        ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_DATA_ENCRYPTED THEN
          DBMS_OUTPUT.PUT_LINE('Table Data Encrypted:      ' || value);
        WHEN DBMS_DATAPUMP.KU$_DFHDR_COLUMNS_ENCRYPTED THEN
          DBMS_OUTPUT.PUT_LINE('TDE Columns Encrypted:     ' || value);
 
        --
        -- For the DBMS_DATAPUMP.KU$_DFHDR_ENCRYPTION_MODE item code a
        -- numeric value is returned. So examine that numeric value
        -- and display an appropriate name value for it.
        --
        WHEN DBMS_DATAPUMP.KU$_DFHDR_ENCRYPTION_MODE THEN
          CASE TO_NUMBER(value)
            WHEN DBMS_DATAPUMP.KU$_DFHDR_ENCMODE_NONE THEN
              DBMS_OUTPUT.PUT_LINE('Encryption Mode:           None');
            WHEN DBMS_DATAPUMP.KU$_DFHDR_ENCMODE_PASSWORD THEN
              DBMS_OUTPUT.PUT_LINE('Encryption Mode:           Password');
            WHEN DBMS_DATAPUMP.KU$_DFHDR_ENCMODE_DUAL THEN
              DBMS_OUTPUT.PUT_LINE('Encryption Mode:           Dual');
            WHEN DBMS_DATAPUMP.KU$_DFHDR_ENCMODE_TRANS THEN
              DBMS_OUTPUT.PUT_LINE('Encryption Mode:           Transparent');
          END CASE;
        ELSE NULL;  -- Ignore other, unrecognized dump file attributes.
      END CASE;
      ind := infoTab.NEXT(ind);
    END LOOP;
  END IF;
END;
/